[Rhodes22-list] Replacement Locks for R22

[Mark Kaynor]

Bob,

To remove the lock, I had to remove the teak strip that holds the hatch down
on the lock (stbd) side. Then I was able to remove lift and remove the hatch
and access the screw heads.

Mark


----- Original Message -----
From: "Bob dietrich" <trevord at rcn.com>
To: "Saroj" <saroj at pathfind.net>; "The Rhodes 22 mail list"
<rhodes22-list at rhodes22.org>
Sent: Thursday, April 17, 2003 9:57 AM
Subject: Re: [Rhodes22-list] Replacement Locks for R22


> I have only one key and tried to get duplicates with no success.  Also
tried
> to take the lock off, no luck there either.  I'm kind of stuck at this
> point.
> ----- Original Message -----
> From: "Saroj" <saroj at pathfind.net>
> To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
> Sent: Thursday, April 17, 2003 9:53 AM
> Subject: Re: [Rhodes22-list] Replacement Locks for R22
>
>
> > Can't you take the lock off the Rhodes and take it to a lock smith to
have
> a
> > key made?  Haven't looked at the boat to see how feasible this is. If it
> is
> > currently locked up, I've heard from a friend who did this once, that
you
> > can usually jiggled the top enuf to disengage the lock and get into the
> > cabin.  At least on mine.
> >
> > Saroj
> > ----- Original Message -----
> > From: "Wally Buck" <tnrhodey at hotmail.com>
> > To: <rhodes22-list at rhodes22.org>
> > Sent: Thursday, April 17, 2003 9:46 AM
> > Subject: Re: [Rhodes22-list] Replacement Locks for R22
> >
> >
> > > Thanks for clarifying, I have no key for locksmith to copy.
> > >
> > > Wally
> > >
> > >
> > >
> > >
> > >
> > >
> > > >From: "Mark Kaynor" <mark at kaynor.org>
> > > >Reply-To: The Rhodes 22 mail list <rhodes22-list at rhodes22.org>
> > > >To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
> > > >Subject: Re: [Rhodes22-list] Replacement Locks for R22
> > > >Date: Thu, 17 Apr 2003 09:26:57 -0400
> > > >
> > > >Wally,
> > > >
> > > >I should probably mention that I did have a single, working key that
> the
> > > >locksmith used to cut his blank - he didn't start from scratch w/ no
> key.
> > I
> > > >don't know how much that would cost.
> > > >
> > > >Mark
> > > >
> > > >
> > > >----- Original Message -----
> > > >From: "Wally Buck" <tnrhodey at hotmail.com>
> > > >To: <rhodes22-list at rhodes22.org>
> > > >Sent: Thursday, April 17, 2003 9:03 AM
> > > >Subject: Re: [Rhodes22-list] Replacement Locks for R22
> > > >
> > > >
> > > > > Guys,
> > > > >
> > > > > Thanks for the info.
> > > > >
> > > > > I am guessing it was cheaper to have a key made then ordering
> > > >replacement
> > > > > from GB? How much were you charged for this service? Anyone know
how
> > > >much
> > > >GB
> > > > > charges for the locks?
> > > > >
> > > > > Wally
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > >From: "Mark Kaynor" <mark at kaynor.org>
> > > > > >Reply-To: The Rhodes 22 mail list <rhodes22-list at rhodes22.org>
> > > > > >To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
> > > > > >Subject: Re: [Rhodes22-list] Replacement Locks for R22
> > > > > >Date: Thu, 17 Apr 2003 08:43:40 -0400
> > > > > >
> > > > > >Wally,
> > > > > >
> > > > > >I have to agree w/ Gil. We just had a local locksmith make a
custom
> > key
> > > >for
> > > > > >the cabin lock. Stan does still sell the cabin locks, BTW. Our
laz
> > key
> > > >used
> > > > > >a TrueValue Y11 blank from our True Value hardware store.
> > > > > >
> > > > > >----- Original Message -----
> > > > > >From: "Eaton, Gil" <GEaton at IKON.com>
> > > > > >To: "'The Rhodes 22 mail list'" <rhodes22-list at rhodes22.org>
> > > > > >Sent: Thursday, April 17, 2003 8:34 AM
> > > > > >Subject: RE: [Rhodes22-list] Replacement Locks for R22
> > > > > >
> > > > > >
> > > > > > > Hi Wally,
> > > > > > > Good luck!!  I tried to get the cabin lock duplicated, mine's
a
> > > > > > > Selby push button device, gave up after bugging all the lock
> shops
> > I
> > > > > >could
> > > > > > > find.  I would order the locks from GBI.  The lazarette lock
is
> > more
> > > > > > > standard, I was able to duplicate without a problem.
> > > > > > > gil
> > > > > > >
> > > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Wally Buck [mailto:tnrhodey at hotmail.com]
> > > > > > > Sent: Thursday, April 17, 2003 8:26 AM
> > > > > > > To: rhodes22-list at rhodes22.org
> > > > > > > Subject: RE: [Rhodes22-list] Replacement Locks for R22
> > > > > > >
> > > > > > >
> > > > > > > I don't have keys to my cabin hatch or laz lock. Anyone know
> what
> > > >size
> > > > > >to
> > > > > > > purchase for replacement? It looks like a pretty standard lock
> and
> > i
> > > >see
> > > > > > > them listed in West.
> > > > > > >
> > > > > > > Thanks,
> > > > > > >
> > > > > > > Wally
> > > > > > >
> > > > > > >
> _________________________________________________________________
> > > > > > > Tired of spam? Get advanced junk mail protection with MSN 8.
> > > > > > > http://join.msn.com/?page=features/junkmail
> > > > > >
> > > > >
> > > > >
> > > > > _________________________________________________________________
> > > > > The new MSN 8: smart spam protection and 2 months FREE*
> > > > > http://join.msn.com/?page=features/junkmail
> > > > >
> > > >
> > >
> > >
> > > _________________________________________________________________
> > > STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
> > > http://join.msn.com/?page=features/junkmail
> > >
> >
> >
>
>