[ham] Re: [Rhodes22-list] stainless steel drilling

[Todd Tavares]

Michael,

  I only saw drill bits online with diamond chips down the entire length.

    I guess Roger must be on vacation.  LOL

Todd

----- Original Message -----
From: Michael Meltzer <mjm at michaelmeltzer.com>
Date: Sun, 03 Aug 2003 00:58:48 -0400
To: The Rhodes 22 mail list <rhodes22-list at rhodes22.org>
Subject: Re: [ham] Re: [Rhodes22-list] stainless steel drilling

> Got a name they go buy, would like a set and google was no help(keep finding bits made of SS)
> 
> MJM
> 
> ----- Original Message ----- 
> From: "Todd Tavares" <sprocket80 at mail.com>
> To: <kroposki at innova.net>; "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
> Sent: Saturday, August 02, 2003 11:51 PM
> Subject: [ham] Re: [Rhodes22-list] stainless steel drilling
> 
> 
> > Michael,
> >
> >     Some years ago I was building stainless steel elevator cabs in a Government laboratory.  I was burning up cobalt tipped drill
> bits by the handful.  One of the guys installing the partitions in the restrooms gave me a special stainless steel bit.  The tip
> looked like a drop of epoxy with diamond chips imbedded in it.
> >
> > Todd
> >
> >
> > ----- Original Message -----
> > From: "Kroposki" <kroposki at innova.net>
> > Date: Sat, 2 Aug 2003 18:02:35 -0400
> > To: "'The Rhodes 22 mail list'" <rhodes22-list at rhodes22.org>
> > Subject: [Rhodes22-list] stainless steel drilling
> >
> > > Michael,
> > > Been there, apparently there are very hard kinds of stainless.
> > > I just don't try to drill stainless.  It does not work.
> > >                              Ed K
> > >
> > > -----Original Message-----
> > > From: rhodes22-list-bounces at rhodes22.org
> > > [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Michael Meltzer
> > > Sent: Saturday, August 02, 2003 4:53 PM
> > > To: rhodes22-list at rhodes22.org
> > > Subject: [Rhodes22-list] it all your fault ed :-)
> > >
> > > ok, I pulled the backing plate for my hardpoints, went to west and got
> > > barrel nut and the right size screews wanted everthing to look nice for
> > > a piture, now my problem, I am not sure what those schaffer backing
> > > plates are made of but I just watched them take out a bouch titiaun high
> > > speed drill bit, 700 rpm drill press using cutting oil. That is f-cking
> > > hard stuff and not the 316 i know. Any idea's what to drill them with?
> > >
> > > MJM
> > > __________________________________________________
> > > Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> > >
> > > __________________________________________________
> > > Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> >
> > -- 
> > __________________________________________________________
> > Sign-up for your own FREE Personalized E-mail at Mail.com
> > http://www.mail.com/?sr=signup
> >
> > CareerBuilder.com has over 400,000 jobs. Be smarter about your job search
> > http://corp.mail.com/careers
> >
> > __________________________________________________
> > Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> >
> >
> 
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list

-- 
__________________________________________________________
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.mail.com/?sr=signup

CareerBuilder.com has over 400,000 jobs. Be smarter about your job search
http://corp.mail.com/careers