[Rhodes22-list] Saving Todd's engineering drawing of triad trailer

[Todd Tavares]

Ed,

   I would hardly call it an "engineering" drawing.  I needed to modify my roller style trailer to a bunk board trailer.
   I made the drawing with 2 major concerns in mind:  (1) Getting the boat supported in the correct spots on the hull.  (2) Getting the boat's loaded position in relation to the axle location close to hopefully keep the finished tongue weight in an acceptable range.
   As of yet, I have not towed the boat over the road or measured the tongue weight, so if anyone uses these measurements, PLEASE keep this in mind.

Todd



----- Original Message -----
From: "Kroposki" <kroposki@innova.net>
Date: Thu, 27 Feb 2003 11:02:13 -0500
To: "'The Rhodes 22 mail list'" <rhodes22-list@rhodes22.org>
Subject: [Rhodes22-list] Saving Todd's engineering drawing of triad trailer

> Todd:
>      I finally had a chance to look at your drawing of the trailer.  Job
> well done.  I think the picture needs to be added to FAQ or Web site.
> Unfortunately, I think Tom Evans has retired or burned out.  While I
> know a lot about operating small computers, I have not gotten into Web
> based yet.  Where is that committee that MJM was talking about a couple
> of months ago. 
> Can someone recommend a reading list for how to do this stuff?
>                                Ed K 
> 
> -----Original Message-----
> From: rhodes22-list-bounces@rhodes22.org
> [mailto:rhodes22-list-bounces@rhodes22.org] On Behalf Of Todd Tavares
> Sent: Wednesday, February 26, 2003 7:50 PM
> To: rhodes22-list@rhodes22.org
> Subject: Re: [Rhodes22-list] Triad Trailers
> 
>  I forgot to attach the sketch as a .jpg   Let me try it again.
> 
> 
>  ----- Original Message -----
> From: "Todd Tavares" <sprocket80@mail.com>
> Date: Wed, 26 Feb 2003 19:38:26 -0500
> To: rhodes22-list@rhodes22.org
> Subject: Re: [Rhodes22-list] Triad Trailers
> 
> > Will,
> >      This is a partial sketch I made by taking measurements of Lloyd
> Crowther's trailer.  The actual bunk measurements were made along the
> curve so reflect the actual length.  Lloyds bunks were exactly 6 inches
> wide.
> > 
> > Todd
> > 
> > ----- Original Message -----
> > From: "William P. Barry, III" <wp.barry@att.net>
> > Date: Wed, 26 Feb 2003 17:07:09 -0500
> > To: "The Rhodes 22 mail list" <rhodes22-list@rhodes22.org>
> > Subject: [Rhodes22-list] Triad Trailers
> > 
> > > does anyone know the bunk length on the R22 Triad Trailers??? 
> > > 
> > > 
> > > ---
> > > Outgoing mail is certified Virus Free.
> > > Checked by AVG anti-virus system (http://www.grisoft.com).
> > > Version: 6.0.459 / Virus Database: 258 - Release Date: 2/25/2003
> > > _________________________________________________
> > > Use Rhodes22-list@rhodes22.org, Help? www.rhodes22.org/list
> > 
> > -- 
> > __________________________________________________________
> > Sign-up for your own FREE Personalized E-mail at Mail.com
> > http://www.mail.com/?sr=signup
> > 
> 
> >
> > _________________________________________________
> > Use Rhodes22-list@rhodes22.org, Help? www.rhodes22.org/list
> 
> -- 
> __________________________________________________________
> Sign-up for your own FREE Personalized E-mail at Mail.com
> http://www.mail.com/?sr=signup
> 
> 
> _________________________________________________
> Use Rhodes22-list@rhodes22.org, Help? www.rhodes22.org/list

-- 
__________________________________________________________
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.mail.com/?sr=signup