[ham] Re: [Rhodes22-list] bow spit

[Steve]

Michael
So what did you end up deciding?  How you going to rig
it!!!!
Steve


--- Michael Meltzer <mjm@michaelmeltzer.com> wrote:
> not a bad idea, the problem is the cleat and vent
> are on the centerline, I do like the spacer idea, by
> lifing the plate get around a
> few bends for the metal.
> 
> MJM
> ----- Original Message -----
> From: "Steve" <rhodes2282@yahoo.com>
> To: "The Rhodes 22 mail list"
> <rhodes22-list@rhodes22.org>
> Sent: Monday, January 13, 2003 6:51 PM
> Subject: [ham] Re: [Rhodes22-list] bow spit
> 
> 
> > Michael
> > I have seen what your talking about but with a
> > varriation. Use the same type of anchor roller
> (the
> > kind with a large U bolt on top; your drawing
> looks
> > that way).  Except pull it back and bolt it in a
> more
> > normal spot.  Use a spinnaker pole.  Run it thru
> the
> > anchor roller and adjust it to about 3 feet in
> front
> > of the boat with outmost tip centered.  Use that
> for
> > your guide on where to stop & Bolt anchor roller.
> > Mount a spinaker holder into the deck for the back
> of
> > the spinaker pole.  The guy used a piece of teak
> for a
> > spacer inbetween the that U bolt on the anchor
> roller
> > and the spinaker pole.  The setup worked quite
> well, I
> > thought.  The spinaker pole takes the beating and
> as
> > long as you mount the anchor roller and the rear
> mount
> > well, the load gets spread out acrose the
> foredeck.
> > Steve
> >
> > --- Michael Meltzer <mjm@michaelmeltzer.com>
> wrote:
> > > I have a idea that I also know I do not have the
> > > skills to evaluate or design.
> > >
> > > I saw the UPS sail at the AC boat show, it nice
> but
> > > I would like to mount it infrount of the current
> > > forestay, I have an idea for a short anchor
> > > roller/bow spit that would solve this problem.
> Any
> > > option and knowing most of the cost with the
> > > fabrication is design(cutting files, bending
> lay-up
> > > etc..) any volunteers (Rodger warren, david
> etc), my
> > > hope is to get it to the point that dwyer(or
> like)
> > > can knock them out for a resonable price.
> > >
> > > MJM
> > >
> > > PS. my bad artwork is attached.
> > > > Name: bowusp.jpg Type: image/jpeg Size: 137069
> > bytes
> > > Desc: not available
> > > Url:
> > >
> >
>
http://www.rhodes22.org/pipermail/rhodes22-list/attch/200301/12/bowusp.jpe
> > > >
> _________________________________________________
> > > Use Rhodes22-list@rhodes22.org, Help?
> > > www.rhodes22.org/list
> > >
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Mail Plus - Powerful. Affordable. Sign up
> now.
> > http://mailplus.yahoo.com
> > _________________________________________________
> > Use Rhodes22-list@rhodes22.org, Help?
> www.rhodes22.org/list
> 
> _________________________________________________
> Use Rhodes22-list@rhodes22.org, Help?
www.rhodes22.org/list


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com