[Rhodes22-list] Forestay Wire Size Upgrade

[Mark Kaynor]

Richard,

FYI - Roger's article is posted in the rhodes22.org document library -
http://www.rhodes22.org/doclib - look for the document titled "Rhodes 22 Rig
Tuning Article".

Mark Kanyor

----- Original Message ----- 
From: "Christine Allison" <sailnut at asan.com>
To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
Sent: Monday, June 02, 2003 1:48 PM
Subject: Re: [Rhodes22-list] Forestay Wire Size Upgrade


> I suggest that you consider exactly what advantage(s) you will gain by
> increasing the size of the standing rigging components.  It seems to me
that
> a Rhodes as delivered is somewhat overigged.  Increasing the diameter of
the
> various stays invites over tensioning of the rig.  A great way to distort
> the hull... or worse!!
>
> A while back Roger posted a wonderful essay on setting up your rig.
Perhaps
> he will do it again?
>
> Basically you want to tension your stays so that the leeward set is barely
> tight under reasonable conditions.  The forestay should be taughtt enough
to
> cause the jib luff to remain basically straight.  The backstay should be
> used to bend the mast (slightly) if you need to pull excess draft out of
the
> main.  Otherwise only tight enough to keep the mast in column.
>
> Richard Smith
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list