[Rhodes22-list] The stern rail

[Robert Quinn]

If the device Stan sent you is the stock piece, it will fit over the stern
rail.  You do not have to remove the rail.

There is probably a screw holding the opening  portion together.  Merely
unscrew the screw and slip the open end over the rail.  It will stretch
enough so as not to break.

Bob on the "NoKaOi"
----- Original Message -----
From: "brad haslett" <flybrad at yahoo.com>
To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
Sent: Saturday, June 07, 2003 9:26 PM
Subject: Re: [Rhodes22-list] The stern rail


> "I feel your pain"
>
> Every night I sleep with an enticing Chinese puzzle.
> When you discover the solution to yours, give me some
> help with mine.
>
> Brad
>
>
> --- mkorsten at optonline.net wrote:
> > I would like to replace the ring clasp that holds
> > the stern ladder in the up position. In order to do
> > this, it seems that it is necessary to disassemble
> > the entire stern rail. I thought this would not be a
> > problem until I tried it and encountered the wire
> > that supplies current to the stern light. This
> > prevents disassembly of the railing. Is there an
> > easy way to free an end of one of the upright tubes
> > so that the new clasp that Stan sent me will slide
> > over it and lock in the appropriate place for
> > grabbing the ladder. I guess I could just use a
> > bungee cord and fix something more important but it
> > has become a bit of an enticing Chinese puzzle.
> >
> > __________________________________________________
> > Use Rhodes22-list at rhodes22.org, Help?
> www.rhodes22.org/list
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
> http://calendar.yahoo.com
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>