[Rhodes22-list] Re- Bedding question?

[Wally Buck]

I had a leak around the base support for the cockpit table pole. I noticed 
the area around the support base had a little flex. I pried off the base and 
there was some rot in the plywood. I drilled a bunch of small holes to help 
dry the area out. All the holes will be covered when I put the table base 
back in place. It is just about dried out and after the next three days of 
90 degree temps it should be ready for repair.

I was going to use my syringe kit to inject CPES (Clear Penetrating Epoxy 
Sealant) into all the holes and then let dry. I was then going to fill with 
an Epxoy Laminating Resin with saw dust filler. What would be the best 
product to rebed the actual base to the cockpit floor, 4200 or something 
else?

Thanks,

Wally

_________________________________________________________________
The new MSN 8: smart spam protection and 2 months FREE*  
http://join.msn.com/?page=features/junkmail