[ham] [Rhodes22-list] Deck thickness

[Michael Meltzer]

it will vary, depending on who and when the lay-up was done, Stan has been making the deck thicker over the years, the only way to
know for sure is to check your own, also the coring has been all over the places, be ready to reinforce the holes with epoxy by
drilling, flood with exoxy and redrill. Rodger has writen about this a few time, might be able to post/repost it.

MJM


----- Original Message -----
From: "Jay Friedland" <a.jayf@verizon.net>
To: "The Rhodes 22 mail list" <rhodes22-list@rhodes22.org>
Sent: Sunday, March 09, 2003 10:18 AM
Subject: [ham] [Rhodes22-list] Deck thickness


> Folks,
> Got the deck hardware for the UPS in advance to install. Doyle includes
> a Wichard watertight U-bolt for the furler mounting, but it only has 1"
> of threads. As my boat is in NC, does anyone know the actual/nominal
> thickness of the deck in front of the vent? Also, is there any
> preferred orientation of the U-bolt to minimize load, with the
> centerline or across? Any other mounting recommendations are
> appreciated.Thanks,
> Jay
>
> _________________________________________________
> Use Rhodes22-list@rhodes22.org, Help? www.rhodes22.org/list