[Rhodes22-list] Todd, running edenton north?

[Todd Tavares]

Ed,

   I bought a 1977 R22 on E-bay last week for $300.  I guess no one else saw it but Big Ben.  Most of the foredeck on my 1974 is soft and needs a total re-do.  I may have a better starting point with the 1977, plus portlights and extra sails.  :-)

Todd



----- Original Message -----
From: "Kroposki" <kroposki at innova.net>
Date: Thu, 27 Nov 2003 09:20:48 -0500
To: "'The Rhodes 22 mail list'" <rhodes22-list at rhodes22.org>
Subject: [Rhodes22-list] Todd, running edenton north?

> 
> Todd,
> 	Did I miss something, two R22's?
>                                       Ed K
> -----Original Message-----
> From: rhodes22-list-bounces at rhodes22.org
> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Todd Tavares
> Sent: Thursday, November 27, 2003 12:39 AM
> To: The Rhodes 22 mail list
> Subject: Re: [Rhodes22-list] was Politics on the list. now Todd's
> traveler
> 
> Steve,
> 
>     I know this was probably a trivial question and not really critical.
> As long as the traveler is high enough to clear the tiller with comfort.
> I save almost every pic that is posted if I think I can get some future
> info to help me with the restoration, especially now since I have 2
> R22's to restore.  I see from these pics that Roger's traveler is much
> higher and has less travel.
> 
>    I cannot find the same style end caps that Stan uses in 1", so I will
> have to get creative.
> 
> But not having the mast up now,  I wanted to make the tube long enough
> to span the distance between the backstays, keeping it high enough,
> while getting maximum travel with out having to break out the TI-82 :-)
> But about 58" - 60" long and 24" up from the chain plates should be in
> the ballpark.
> 
> Besides,  I wanted Fred to have some enjoyable boat posts to peruse. ;-)
> 
> 
> Todd
> 
> 
> 
> ----- Original Message -----
> From: Steve Alm <salm at mn.rr.com>
> Date: Wed, 26 Nov 2003 14:25:51 -0600
> To: Rhodes <rhodes22-list at rhodes22.org>
> Subject: Re: [Rhodes22-list] was Politics on the list. now  Todd's
> traveler
> 
> > 13 holes for adjustment?  ...Huh?  Since my 1990 R22 is put to bed for
> the
> > season, I can't give you any dimensions, but my 1" OD traveler bar
> fits into
> > 1" ID caps that are attached to the back stays and held in place with
> a pin
> > through a single hole.
> > 
> > Slim
> > 
> > On 11/26/03 9:28 AM, "Todd Tavares" <sprocket80 at mail.com> wrote:
> > 
> > > Thanks Jerry!
> > > 
> > > 
> > > ----- Original Message -----
> > > From: "cjlowe" <cjlowe at bright.net>
> > > Date: Tue, 25 Nov 2003 23:15:35 -0500
> > > To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
> > > Subject: Re: [Rhodes22-list] was Politics on the list. now  Todd's
> traveler
> > > 
> > >> Todd,
> > >>   I have an 86 with IMF. The traveler is 59 5/8 " long, of 1"
> tubing.The
> > >> distance between the center of the eye of the swedged fitting and
> the center
> > >> of the traveler tubing is 15". The eye attaches the a U shaped
> bracket 4
> > >> 1/4" long ,with 13 holes in it for adjustment. If you need anything
> else
> > >> just holler
> > >>   Jerry
> > >> 
> > >> __________________________________________________
> > >> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> > >> 
> > 
> > __________________________________________________
> > Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> > 
> 
> -- 
> ___________________________________________________________
> Sign-up for Ads Free at Mail.com
> http://promo.mail.com/adsfreejump.htm
> 
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> 
> 
> 
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list

-- 
___________________________________________________________
Sign-up for Ads Free at Mail.com
http://promo.mail.com/adsfreejump.htm