[Rhodes22-list] Hello from a New Boat Owner

[Michael Meltzer]

he right, most likely inside sheeting, are their clamcleats inline with the failleads to hold a jib line? OTHO is a clone so maybe?
can you take a picture?

MJM

----- Original Message ----- 
From: <JSusanj at aol.com>
To: <rhodes22-list at rhodes22.org>
Sent: Thursday, April 22, 2004 3:47 PM
Subject: Re: [Rhodes22-list] Hello from a New Boat Owner


> These fair leads are on the side deck next to the cabin
> but that does sound logical, especially if you're flying a
> small genoa or working jib.
>
> Also, I forgot to mention where I sail.  We are planning
> to keep the boat at Sioux Harbor in Portage Des Sioux, MO on
> Alton Lake.  Alton Lake is a wide spot in the Mississippi
> River above the dam at Alton IL.  We also have a Chrysler
> Mutineer at Valley Sailing Association near Portage Des
> Sioux on the same lake.
>
> In a message dated 4/22/2004 1:52:06 PM Eastern Daylight Time, Robert.Dilk at TRW.COM writes:
>
> >
> > Jeff
> >
> > 2nd question: I believe the fair leads on the cabin top are for sheeting inside the shrouds.
> > I have the GBI roller reefing 150% Genoa which if I roll up to 100% I can sheet inside the shrouds. works poorly
> > I can also furl the Genoa and fly a wire luff storm jib behind the forestay and sheet inside the shrouds. this works great.
> >
> > Hope that helps
> >
> > Bob
> > S/V Knot Necessary
> >
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>