[Rhodes22-list] CB trunk surgery

Steve rhodes2282 at yahoo.com
Thu Dec 9 08:59:35 EST 2004


Lou
Without putting some fibres into the glass; (Rogers
knows this stuff better than me) but just glass
doesn't have a lot of streght to it.  One small crack;
and the problem will come right back.  

If all you are wanting to do is seal the area & fill
the void; I would think that 3M 5200 would do the job
much easier without any of the hassle of fiberglass. 
Just an idea.  
Steve


--- Lou Rosenberg <lsr3 at MAIL.nyu.edu> wrote:

>   Steve,
>    Thanks for the idea of  using a sealant on the
> cement.  I was 
> thinking I would just use thickened epoxy using
> Colloidal Sillica as 
> a filler b/c there is not much room to work some
> glass tape even in 
> this slot.   I  believe that just applying the epoxy
> in a few good 
> layers will give me the strength I need in the
> trunk.   there didnt 
> seem to be glass in there before.
> Lou
> 
> 
> 
> >Lou
> >If you let the cement dry out completely; then use
> >some cement sealent; the epoxy will adhear to it. 
> Mix
> >the first batch hot to cure quick; made of just
> epoxy.
> >  That will put glass over the area that you can
> start
> >building up from then.  Then cut up some fiberglass
> >fiber and work that into the area that you are
> wanting
> >to build up making sure all the fiber get wetted
> in.
> >Then just do normal patches over the area several
> >times to build up the strenght of the area.  Then
> of
> >course, the patches that bond to the existing hull
> to
> >finish off the patch. 
> >Steve
> >
> >
> >--- Lou Rosenberg <lsr3 at MAIL.nyu.edu> wrote:
> >
> >>  Roger,
> >>     I purchase a small cutting disc for my dremel
> >>  yesterday and hope to
> >>  begin the work on Sun.
> >>     My plan is to:
> >>      Remove the cement which is causing the
> bulge,
> >>  then I will have to
> >>  insert a  thin plastic or metal piece to cover
> the
> >>  cement as the
> >>  epoxy will not bond directly to the cement
> >>  effectively.
> >>    I will sand the thin plastic down for good
> >>  adherance  quality and
> >>  hope to just fit it under snugly to the
> surrounding
> >>  trunk.
> >>    any comments/ suggestions??
> >>    Lou
> >>
> >> 
> __________________________________________________
> >>  Use Rhodes22-list at rhodes22.org, Help?
> >>  www.rhodes22.org/list
> >>
> >
> >
> >
> >
> >__________________________________
> >Do you Yahoo!?
> >The all-new My Yahoo! - What will yours do?
> >http://my.yahoo.com
> >__________________________________________________
> >Use Rhodes22-list at rhodes22.org, Help?
> www.rhodes22.org/list
> 
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help?
> www.rhodes22.org/list
> 



		
__________________________________ 
Do you Yahoo!? 
Read only the mail you want - Yahoo! Mail SpamGuard. 
http://promotions.yahoo.com/new_mail 


More information about the Rhodes22-list mailing list