[Rhodes22-list] Genoa sheet will chafe
SVGravityLeak at aol.com
SVGravityLeak at aol.com
Fri Oct 22 20:42:22 EDT 2004
Even worse, the sheet could snag the Cotter ring and pull it out of the
Clevis pin. Then the shroud could let go.
I over compensate by rigging with all Clevis pin heads outboard, then duct
taping around the turnbuckles covering the ring and pin, then jamming the shroud
tubes to the rail covering the whole turnbuckle.
Fred
In a message dated 10/22/04 7:16:34 PM Eastern Daylight Time,
ekroposki at charter.net writes:
>
> Rummy,
> It is a good thing that you posted that picture. I presume that red
> line crossing the outer and forward inner shroud is the Genoa sheet. It
> will chafe the way that it is rubbing on the turnbuckles.
> Some people use rigging tape to cover the offending turnbuckle. As
> you know, my boat has funky white plastic PVC tubes that cover that part of
> the turnbuckle. My plastic covers came from the Lowe's plumbing department.
> They have a wider end that fits over the turnbuckle allowing the sheet to
> run smoothly across without chafing.
> Since the Shucks are not on the list and you know how to find them,
> I leave it to you to show them what I am saying.
> BTW this is the gospel according to Stan. Amen.
>
> Ed K
>
>
More information about the Rhodes22-list
mailing list