[Rhodes22-list] Lloyd's question on Tube

[Lloyd Crowther]

Sorry folks,

I guess I need to take a course in communications.  What I wanted to know 
was how did Bill get the labels about the screws etc. on the photos.  I 
guess my question was even more confusing because it wasn't even about 
sailing, but rather about computer technique.  Rodger used a similar 
presentation on several of his older photos and Sanjo put a circle on a 
photo of her rudder conection once.  I have always wondered how they did 
that and I have recently aquired a copy of Power Point but no directions. 
If that was the program used I think I can figure it out, I have plenty of 
time if nothing else.

Sorry about the confusion.

Lloyd

----- Original Message ----- 
From: "ed kroposki" <ekroposki at charter.net>
To: "'The Rhodes 22 mail list'" <rhodes22-list at rhodes22.org>
Sent: Thursday, May 19, 2005 7:53 AM
Subject: [Rhodes22-list] Lloyd's question on Tube


Lloyd,
Bill may understand your question, but I am missing it.  How did he
do what?  Slide the inter IMF tube out of the mast or is there more to your
question.

Ed K
Greenville, SC, USA
Addendum:  "If slavery is not wrong, nothing is wrong.  I can not remember
when I did not so think and feel."  A.Lincoln

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Lloyd Crowther
Sent: Wednesday, May 18, 2005 11:15 PM
To: The Rhodes 22 mail list
Subject: Re: [Rhodes22-list] Bottom of IMF Tube

Bill,

How did you do this? (Annotated Bottom of IMF Tube)

Lloyd

----- Original Message ----- 
From: "Bill Effros" <bill at effros.com>
To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
Sent: Wednesday, May 18, 2005 1:00 AM
Subject: Re: [Rhodes22-list] Bottom of IMF Tube


> Rummy,
>
> I think there is supposed to be a flange on the beige piece on the left
> which has sheared off.  I think the flange is supposed to hold the
> fitting in place when the screw is tightened on the flange.  I think the
> furling tube is supposed to rotate inside the beige piece.  I gather
> from Wally that screws go into the holes on the rims of the black pieces
> to keep the black pieces from rotating inside the IMF chamber of the
> mast extrusion.  I don't think the beige piece is supposed to be cracked.
>
> But I'm just guessing.  Do I have this wrong?  I think the beige piece
> on the right is in good shape, and that the beige piece on the left is
> supposed to look and function like the beige piece on the right.  They
> are not the same.
>
> Annotated Picture attached.
>
> Bill
>
> R22RumRunner at aol.com wrote:
>
>>
>>In a message dated 5/17/2005 10:34:23 A.M. Eastern Daylight Time,
>>bill at effros.com writes:
>>
>>http://www.rhodes22.org/pipermail/rhodes22-list/attch/200505/16/BottomofIM
FTub
>>
>>
>>>e.jpg
>>>
>>>
>>
>>
>>
>>Bill,
>>What is your problem with the current pieces? They appear to be in good
>>shape and don't show any signs of UV degradation.
>>
>>Rummy
>>__________________________________________________
>>Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>
>>
>>
>


----------------------------------------------------------------------------
----


> Name: Annotated Bottom of IMF Tube.jpg Type: image/jpeg Size: 59243 bytes
> Desc: not available
> Url:
>
http://www.rhodes22.org/pipermail/rhodes22-list/attch/200505/18/AnnotatedBot
tomofIMFTube.jpg
>


----------------------------------------------------------------------------
----


> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list


__________________________________________________
Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list


__________________________________________________
Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list