[Rhodes22-list] FW :CB Cleat

[Slim]

Bill,

How'd the wedding go?

Slim

On 8/22/06 7:23 PM, "Bill Effros" <bill at effros.com> wrote:

> Or you could just put down your drink and hold the line.  This is advice
> you will never get from Rummy.
> 
> Bill Effros
> 
> R22RumRunner at aol.com wrote:
>> Slimmeister,
>> Now I understand the problem. You are the problem. Simply squirting some
>> epoxy into the holes ain't a gonna get the job done. Forget mollies. They
>> won't  
>> give you the strength you need nor will pop rivets.
>> You need to approach the project from the standpoint that you are going to
>> rebuild the entire area. This involves heavy sanding or grinding, drilling
>> out  
>> the holes to make a larger hole and then cleaning the whole thing with
>> lacquer  thinner or something similar. Grind up some fiberglass fibers and
>> put those 
>> into  the epoxy mix. In order to keep the stuff where you want it, I would
>> rig  something up on the underside that would keep the materials in place (
>> perhaps a  small piece of cardboard with a string attached) and then pour
>> away, 
>> being sure  to keep it away from the pennant. Allow to dry thoroughly, have
>> massive  quantities of rum and come back the next to day to sand and drill
>> some 
>> new  holes. I would use a good bedding compound, something permanent like
>> 5200? 
>>  
>> Rummy
>> __________________________________________________
>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>> 
>>   
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list