[Rhodes22-list] Stan?
Arthur H. Czerwonky
czerwonky at earthlink.net
Sat Feb 4 18:44:26 EST 2006
Slim,
Like I say, Cheers!
Are you sipping that 12 year old rum like Rummy suggests? Have a nice weekend.
Art
-----Original Message-----
>From: Slim <salm at mn.rr.com>
>Sent: Feb 4, 2006 4:48 PM
>To: Rhodes22-list <rhodes22-list at rhodes22.org>
>Subject: Re: [Rhodes22-list] Stan?
>
>First I turn the boom upside down and slide the roof tabs into the boom
>slot. Starting with the front, I attach the PVC pieces to the outer edges
>of the roof with the little velcro straps. Although all side panels come
>off, I usually leave the four corner panels attached to the roof to speed up
>the process. After the frame is fully assembled I snap down the side
>panels, adding or subtracting whatever panels desired. Height adjust with
>the topping lift and main sheet to make the sides taught. Cocktails!
>
>Slim
>
>On 2/4/06 3:26 PM, "Arthur H. Czerwonky" <czerwonky at earthlink.net> wrote:
>
>> Slim,
>>
>> I drape the cover cloth over the boom, two poles fore and aft and snap the
>> cross beam in place. Tie front and back, tie four corners, hang the drapes,
>> and it's pretty much done...
>>
>> Art
>>
>> -----Original Message-----
>>> From: Bill Effros <bill at effros.com>
>>> Sent: Feb 4, 2006 3:56 PM
>>> To: The Rhodes 22 mail list <rhodes22-list at rhodes22.org>
>>> Subject: Re: [Rhodes22-list] Stan?
>>>
>>> Slim,
>>>
>>> In concept, not detail, how do you assemble your boom room?
>>>
>>> Art,
>>>
>>> How do you assemble yours?
>>>
>>> I will post, in detail, how I assemble and disassemble my PTE. I don't
>>> use Roger's on-the-ground method since my PTE never leaves the boat.
>>> Not today, though.
>>>
>>> Bill Effros
>>>
>>> Slim wrote:
>>>> I don't mind setting up my BR but when the girls go out without me they
>>>> never use it. Typically, they'll drop anchor and start in with cocktails
>>>> and prep for dinner. By the time they finish eating and clean-up, it's
>>>> dark, they're into their cups and feel like relaxing rather than wrestling
>>>> with the BR. They often talk of a new design that would be simpler and
>>>> easier to set up. One that could be managed by a couple of drunk chicks in
>>>> the dark. 8-) They love the ease of the PTE. I wouldn't trade in my BR
>>>> but they would.
>>>>
>>>> If the roof went over the boom, it would require less frame than mine which
>>>> hangs from below the boom. The fewer pieces the better. Optimally I'd like
>>>> a less complicated frame, roof over boom, not over the side decks, not have
>>>> to disconnect any shrouds, and integrated with the PTE. Or if not
>>>> integrated w/PTE, then it should snap down around the cabin in the same way
>>>> and have the same features. My BR makes it quite difficult to get out on
>>>> the fore deck. The new design should cover only the cockpit and the cabin
>>>> with "doors" to go from the cockpit to the side decks outside the shelter
>>>> thus no more interference with the aft lowers and no more crouching through
>>>> the "tunnel" to go forward.
>>>>
>>>> Slim
>>>>
>>>> On 2/4/06 12:42 PM, "Bill Effros" <bill at effros.com> wrote:
>>>>
>>>>
>>>>> Slim,
>>>>>
>>>>> I think we're hearing through Dave. Stan doesn't have time for this.
>>>>> He has pointed us in the right direction, and he wants to see how it all
>>>>> sorts out before he contributes a lot more time and effort that could
>>>>> net him nothing but grief. It's happened before. If we can come up
>>>>> with something that makes sense for Stan, he'll come in and refine what
>>>>> we come up with. If not, he'll stick to his knitting.
>>>>>
>>>>> I am getting more firm commitments back-channel from people who say they
>>>>> would actually buy finished product at fair price from Stan.
>>>>>
>>>>> If we can underwrite prototypes using lesser materials by selling test
>>>>> parts to individuals on the list, that would make a better finished
>>>>> product, while providing the basics to people who otherwise might not be
>>>>> able to afford them, or to make them.
>>>>>
>>>>> What about you? If you could sell your existing Boom Room, or trade it
>>>>> in for an improved model, would you do it? At no cost? At slight
>>>>> cost? At full cost? What would you like to see improved on your Boom
>>>>> Room? That's what we're really talking about. What could we make that
>>>>> would fit your boom room? I assume everyone must affix their own female
>>>>> snaps to the fabric to match the males on their boats?
>>>>>
>>>>> If the frame went above the boom would that mean that the new panels
>>>>> would not fit on your boat? Or could you attach the snaps with more
>>>>> overhang?
>>>>>
>>>>> Does your ladder design frame make up with additional frame pieces what
>>>>> Art's H-Frame design achieves with stronger structural members? If cost
>>>>> were no object, which would you rather have?
>>>>>
>>>>> Bill Effros
>>>>>
>>>>> Slim wrote:
>>>>>
>>>>>> I know Stan's busy but he's been conspicuously silent on this whole boom
>>>>>> room discussion. It would be nice to hear from him.
>>>>>> Slim
>>>>>>
>>>>>> __________________________________________________
>>>>>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>> __________________________________________________
>>>>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>>>>
>>>>
>>>> __________________________________________________
>>>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>>>
>>>>
>>>>
>>> __________________________________________________
>>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>
>> __________________________________________________
>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>
>__________________________________________________
>Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
More information about the Rhodes22-list
mailing list