[Rhodes22-list] Electrical Question

[Hank]

Bob,

I suspect you have a common ground for all of the items.  Check to make sure
that it has not become disconnected.

Hank

On 7/17/06, Bob Weber <ruba1811 at hotmail.com> wrote:
>
> Lou, I did just that.  Full 12V at the panel.  Each switch has a .1 volts
> in
> off and almost 12V in on position.  I moved the jumpers from one position
> to
> another to make it Identical to the one I removed.  If I have almost full
> Volts with the switch on the on position "where do it go" obviously not to
> the light bulbs.  Don't fail to tell me something that should be OBVIOUS
> because I am Obviously totally clueless.  What am I missing?  Bob W
>
>
> >From: Lou Rosenberg <lsr3 at MAIL.nyu.edu>
> >Reply-To: The Rhodes 22 mail list <rhodes22-list at rhodes22.org>
> >To: The Rhodes 22 mail list <rhodes22-list at rhodes22.org>
> >Subject: Re: [Rhodes22-list] Electrical Question
> >Date: Mon, 17 Jul 2006 17:15:11 -0400
> >
> >  Bob,
> >  Keep it simple Bob.  Work your way backwards from your battery to your
> >panel.   Using the meter make sure you are getting all the volts from the
> >battery  to the panel. Are you using a solar panel for passive charging
> of
> >the battery?
> >If you have 2 batteries have you tested your main switch?
> >
> >If panel is definitely getting its power, the LED switch lights are
> >illuminated , test the output of each circuit separately with the meter.
> >If  circuits are getting power, your bulbs could have gotten fried
> somehow.
> >   Test every circuit separately.  Test the switches on the new panel as
> >well.
> >Lou
> >
> >
> >
> >>Hi all, Mabey someone can help me with a mystery.  My switch panel
> stopped
> >>working.  When I looked at it one of the bars fell completely off, so I
> >>figured that was the problem and bought a new one.  I got the exact same
> >>kind (4 switch sea dog) .  I installed the new one yesterday and it
> >>doesn't work either.  I volt metere says I have power at the panel I
> >>lights on the switches illuminate when on but none of the lights / depth
> >>sounder work.  It was 100 degrees and I tried a fussed around for about
> an
> >>hour and then quit. Does anyone have any idea what I might have done
> >>wrong?  Thanks in advance.  Bob Weber
> >>
> >>
> >>__________________________________________________
> >>Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> >
> >
> >__________________________________________________
> >Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>