[Rhodes22-list] CB Trunk & CB restoration info

[Bill Effros]

Nuance makes a product for $79 that works very well.  It is also sold as 
part of PaprPort, so it's free if you buy PaprPort.  My guess is that 
list members would be willing to spot you the $79 if you would like to 
own this program.

Before that I used something else, but I'll have to look to figure out 
what it was.  I own several PDF converters, but the Nuance product (PDF 
Create or something like that) works best.

Bill Effros

William P. Barry, III wrote:
> PrimoPDF...let me know if you know of something better thats free???
>
> Will Barry
> wp.barry at att.net
>
>
> ----- Original Message ----- From: "Bill Effros" <bill at effros.com>
> To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
> Sent: Tuesday, March 14, 2006 8:40 PM
> Subject: Re: [Rhodes22-list] CB Trunk & CB restoration info
>
>
>> Will,
>>
>> What are you converting with?
>>
>> Bill Effros
>>
>> wp.barry at att.net wrote:
>>> That would be a technical error on my part. The conversion to PDF 
>>> somehow went sour. I'll have to make another attempt at it later.
>>> Will Barry
>>> wp.barry at att.net
>>>
>>>
>>>
>>>
>>> -------------- Original message from "Rob Lowe" <rlowe at vt.edu>: 
>>> --------------
>>>
>>>
>>>> Lou, Great article. Learned more about concrete than I ever knew 
>>>> before. I noticed the diagram on page 9 is pretty hard to read. 
>>>> don't know if you can do anything about it or not. - rob
>>>> ----- Original Message ----- From: "Lou Rosenberg" To: "The Rhodes 
>>>> 22 mail list" Sent: Tuesday, March 14, 2006 12:43 PM Subject: Re: 
>>>> [Rhodes22-list] CB Trunk & CB restoration info
>>>>
>>>>
>>>>>> Ed K/ Tootle, Rhodies,
>>>>> Well thanks to Will P. Barry and Roger Pihlaja I finally got 
>>>>> around to listing my work online. The board is not quite finished 
>>>>> as I need to shave it down a bit to make it totally retract for 
>>>>> trailering, but that is minor compared to what has been done.
>>>>> All the drawings are mine and if you look VERY CAREFULLY, I refer 
>>>>> to the L shaped patch in the trunk as being on the Port side, its 
>>>>> actually Stb and my little 3D sketch is wrong! Not a big deal, but 
>>>>> I am a Stanley Kubrick fan for details.
>>>>> Roger also helped me with an article I sent to Good Old Boat 
>>>>> Magazine as a technical article but the editor turned it away 
>>>>> because it deals with only one boat design.
>>>>> I am rewiring the boat and still waiting for warmer temps so I can 
>>>>> glass in my new stringers and put my galley back together.
>>>>> Lou Rosenberg s/v (project boat) " Miracles "
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> -- 
>>>>>> View this message in context: 
>>>>>> http://www.nabble.com/rhodes22.org-UPDATE-t1276424.html#a3399372 
>>>>>> Sent from the Rhodes22 forum at Nabble.com.
>>>>>> __________________________________________________ Use 
>>>>>> Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>>>> __________________________________________________ Use 
>>>>> Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>>> __________________________________________________ Use 
>>>> Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>> __________________________________________________
>>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>>
>>>
>> __________________________________________________
>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list 
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>