[Rhodes22-list] Toothpicks
Bud
budconnor at earthlink.net
Fri Mar 2 08:37:48 EST 2007
Luis,
you could also try golf tees, or you can get very thin wooden dowels
from Home Depot.
I like using dowels for these types of projects as you can get the right
diameter for your project.
-Bud
Bill Effros wrote:
> Luis,
>
> Even if rot is not part of your problem, yanking out the screws
> stripped the holes in the tabernacle, so it would not be possible to
> set the same screws in the same holes. Most people go to larger
> screws, but there is another approach that is useful in many instances:
>
> Dip some wooden toothpicks in any decent wood glue and then insert
> them into the stripped hole, clipping off the tops so the toothpicks
> are flush. Allow the glue to dry. Now drive the same screws, into
> the same holes. They will set like new, and they will not loosen.
>
> Bill Effros
>
> Luis Guzman wrote:
>
>> Guys,
>>
>> Today I had an accident while stepping down the mast. I had 3 people
>> help me, but a couple of them were not paying attention and let the
>> mast drop. (Everybody was sober and I think that was my mistake).
>>
>> The only damage was to the lights, wind vane, and the base that was
>> holding the tabernacle. All screws just came out and nothing got
>> bent. It seems to me the there is a little bit of rot in the wood
>> under the tabernacle and the screws were not really holding.
>>
>> Any suggestions as to how to repair.
>>
>> Luis
>>
>>
>>
>> ____________________________________________________________________________________
>>
>> It's here! Your new message! Get new email alerts with the free
>> Yahoo! Toolbar.
>> http://tools.search.yahoo.com/toolbar/features/mail/
>> __________________________________________________
>> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>>
>>
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>
>
More information about the Rhodes22-list
mailing list