[Rhodes22-list] Bruce's Rotten Bottom

[bgreenwald at optonline.net]

Thanks Rummy and Ed,I am not sure I can even get the lip of the piece up off the floor enough to either spray something in or get a pry bar under it but I will give both  a try.  I assume if I can't make any progress I can simply put some sort of schmutz into the bottom to seal it off from the foam (which has already taken a bit of a beating from a couple of years of neglect) and reseal the lip - as best I can - and move on. I really dont want to end up breaking apart the floor.   Does that make sense?Bruce Greenwald----- Original Message -----From: Tootle Date: Sunday, May 13, 2007 10:10 pmSubject: [Rhodes22-list] Bruce's Rotten BottomTo: rhodes22-list at rhodes22.org> > Bruce:> > Before you proceed with the prying as recommended by Rummy, > Stan's people> like to use 5200 to glue things down.  So I suspect you do not > have silicone> holding it down.  Get some 5200 debonding agent and spray > generously under> sticking edge.  Let soak several hours and spray again, then > follow Rummy's> directions...  > > Try more than one kind of debonding agent if it stll holds after > the first> go around.  You are trying not to damage the glass which is more > difficultto make look like new.> > Ed K> Greenville, SC, USA> -- > View this message in context: http://www.nabble.com/Bruce%27s-> Rotten-Bottom-tf3741885.html#a10515894> Sent from the Rhodes 22 mailing list archive at Nabble.com.> > __________________________________________________> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list> 

Bruce Greenwald
S/V Ruach II