[Rhodes22-list] Sorry I meant the

Wed Jul 2 22:57:01 EDT 2008

Jack,
Attached to motor and tiller side - attached at a point on each which is equidistant from the pivot points - 90 degree bimini deck mounts.
Attached between - Approx 10-12" 7/8" OD SS tube with eye ends on each end.
Simply match the eyes with the bimini mounts.  I'd use quick disconnects for easy removal of the tube, freeing up non-linked motor motion (raising, etc.)  Mount so that the screw for the bimini mounts is vertical and both rudder and motor can turn easily in sync.  I don't think Stan would have this for sale - West (or Boater's World) should.  Does that help?
Art

-----Original Message-----
>From: John Chirch <jchirch at gmail.com>
>Sent: Jul 2, 2008 8:51 AM
>To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
>Subject: Re: [Rhodes22-list] Sorry I meant the
>
>Art:   What constitutes "proper fittings"?  Does GB carry them? or a kit,
>maybe?
>
>Jack
>
>On Wed, Jul 2, 2008 at 9:07 AM, Arthur H. Czerwonky <czerwonky at earthlink.net>
>wrote:
>
>> Mike,
>> You can link rudder to motor with about 12" of tube from West with proper
>> fittings on each end.
>> Art
>>
>> -----Original Message-----
>> >From: Mike Cheung <mikecheung at att.net>
>> >Sent: Jul 2, 2008 6:39 AM
>> >To: rhodes22-list at rhodes22.org
>> >Subject: [Rhodes22-list]  Sorry I meant the "new" Yamaha 8 or 9.9 hp
>> >
>> >
>> >David,
>> >
>> >Thanks for responding, but "my bad" ... I meant the "new" T8ELH or T9.9ELH
>> >outboards with the gearshift and throttle controls on the motor tiller (as
>> >opposed to the sailboat tiller).  Apparently the UPP with sailboat tiller
>> >mounted controls was developed for a motor that's no longer available new
>> >and Stan is using either used motors with the controls on the sailboat
>> >tiller or a new Yamaha 8 hp motor (the T8ELH I presume) that has the
>> >controls for both the throttle and gearshift on the motor tiller.  Stan
>> >doesn't relocate the controls with these newer motors.  Apparently the old
>> >motor was the only one Stan had found where the remote cables came out the
>> >side of the motor housing rather than the front.  With the cables coming
>> out
>> >the front there is apparently some issue with cable bending radius and
>> >binding.
>> >
>> >My Admiral and I got to use the UPP on Stan's test boat and liked it, but
>> >don't think the extra cost is really worth it in this case.  Stan is
>> really
>> >his own worst competition here as his 7:1 manual system sounds very, very
>> >good.  Anyway we're looking for feedback on the new T8ELH from Yamaha and
>> >the even newer T9.9ELH both of which have the gear shift right behind the
>> >throttle on the motor tiller.  Not quite as good as having them on the
>> >sailboat tiller, but not bad if they're easy to reach from the port stern
>> >seat.
>> >
>> >Guess I don't know what the old motors weigh, the T8ELH comes in at right
>> >about 80 lbs.  Manageable by one, easy for two (or one with some
>> mechanical
>> >advantage).
>> >
>> >What my Admiral and I will miss from the UPP package is the rudder/motor
>> >interconnect.  That was great and if we can't get Stan to unbundle that
>> from
>> >a UPP package we'll have to work on engineering one ourselves.
>> >
>> >Mike Cheung
>> >
>> >
>> >
>> >
>> >David Bradley wrote:
>> >>
>> >> Mike, I have the 9.9 with UPP and tiller-mounted control.  I love it.
>> >> Can cruise at hull speed at about 2/3 throttle.  Power when you need
>> >> it in a strong current, for maneuvering, etc.  Relatively quiet.  It's
>> >> heavy, so I don't look forward to the day I need to take it off the
>> >> boat...
>> >>
>> >> Dave
>> >>
>> >>
>> >> On Tue, Jul 1, 2008 at 5:39 PM, Mike Cheung <mikecheung at att.net> wrote:
>> >>>
>> >>> Anyone running one of the Yamaha 8 or 9.9 hp outboards with the
>> gearshift
>> >>> on
>> >>> the tiller? How do you like it?
>> >>> --
>> >>> View this message in context:
>> >>> http://www.nabble.com/Yamaha-8-or-9.9-hp--tp18228090p18228090.html
>> >>> Sent from the Rhodes 22 mailing list archive at Nabble.com.
>> >>>
>> >>> __________________________________________________
>> >>> To subscribe/unsubscribe or for help with using the mailing list go to
>> >>> http://www.rhodes22.org/list
>> >>> __________________________________________________
>> >>>
>> >>
>> >>
>> >>
>> >> --
>> >> David Bradley
>> >> +1.206.234.3977
>> >> dwbrad at gmail.com
>> >> __________________________________________________
>> >> To subscribe/unsubscribe or for help with using the mailing list go to
>> >> http://www.rhodes22.org/list
>> >> __________________________________________________
>> >>
>> >>
>> >
>> >--
>> >View this message in context:
>> http://www.nabble.com/Yamaha-8-or-9.9-hp--tp18228090p18235600.html
>> >Sent from the Rhodes 22 mailing list archive at Nabble.com.
>> >
>> >__________________________________________________
>> >To subscribe/unsubscribe or for help with using the mailing list go to
>> http://www.rhodes22.org/list
>> >__________________________________________________
>>
>> __________________________________________________
>> To subscribe/unsubscribe or for help with using the mailing list go to
>> http://www.rhodes22.org/list
>> __________________________________________________
>>
>__________________________________________________
>To subscribe/unsubscribe or for help with using the mailing list go to http://www.rhodes22.org/list
>__________________________________________________