[Rhodes22-list] centerboard repair - cap sealant? reply to Saroj

[ben]

Hey Saroj,

I don't have anything to add to Ed's response, which I think is right-on.
But welcome back to the conversation, and thanks for adding a new topic!

Ben S.
R22 Velvet Elvis

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Tootle
Sent: Tuesday, October 28, 2008 9:23
To: rhodes22-list at rhodes22.org
Subject: [Rhodes22-list] centerboard repair - cap sealant? reply to Saroj


Saroj:

As to sealants, do not use 5200 like some boat builders.  It is called
sealant but it is permanent and prevents future repair, painting, etc.

I recommend a sealant that says for under water use.  3M 4000 or 4200 are
numbers I can think of quickly.  Go to the 3M website and see which one is
for underwater use.  (I know the cap is not underwater, except at times)

Another popular product is Boat Life Sealant, not Boat Life Caulk.

As to silicone products, make sure it says for underwater use.  Silicone II
is said to be the better formulation of silcone sealants.  

I would not go to Lowes.  Go to any dockside marine store or if you have to
the high dollar 'West Marine'.  It would be better to pay the few extra
schekels at West to get a quality product.

As to screws and bolts, Stan uses a million bolts at the shop.  Maybe older
boats had a mix, but I would opt to go to thru bolts, all one million of
them.  Also, after you tighten all the first time, go around a second time
and maybe a third.  A small 1/4" rachet works for this job.  If you do not
have one, head for Sears and get a Craftsman set.

It is good to see your post.  Are in in contact with any other 'Tidewater'
Rhodies?

Ed K




Saroj Gilbert wrote:
> 
> any chance I can ask a question about the Rhodes22? LOL... 
> 
> my centerboard would not raise or lower so friend and I took the cap
> apart; found that the blocks had broken off the CB; scraped, sanded, and
> painted the inside of the cap, the well and the CB (all encrusted with
> barnacles).  We have it put back together except for the cap which has the
> gasket which was already there... appears in pretty good shape.  We
> modified some blocks which was challenging since the attachment area is so
> small.  Also did some fiberglass repair on the CB and the keel.
> 
> Two questions:
> 
> - most of the holes had screws but some had bolts... I assume that an
> earlier owner had stripped out the screw holes.  Is it likely that reusing
> the screws will provide sufficient pressure to prevent leaks or should we
> go to the trouble of replacing all with bolts... I'd prefer not because
> there are so many, but I don't want leaks obviously.
> 
> - what sealant should we use? I took off the old sealant which was a blue
> colored rubbery substance that came off pretty easily from both sides. 
> Roger's instructions said to use silicone.  Is there a particular type or
> any old stuff from Lowes?  If we use silicon, do we need to let it cure a
> little before clamping down 100% to give it a chance to cure? (seems to me
> it requires air to start the curing process).  Has anyone used RTV...
> overkill for this application?
> 
> I have searched and searched for the tech info material that was created
> and organized years ago with no luck.  Can someone give me a URL for it or
> does it no longer exist?
> 
> Thanks, Saroj
> __________________________________________________
> To subscribe/unsubscribe or for help with using the mailing list go to
> http://www.rhodes22.org/list
> __________________________________________________
> 
> 

-- 
View this message in context:
http://www.nabble.com/centerboard-repair---cap-sealant--tp20207877p20208179.
html
Sent from the Rhodes 22 mailing list archive at Nabble.com.

__________________________________________________
To subscribe/unsubscribe or for help with using the mailing list go to
http://www.rhodes22.org/list
__________________________________________________