[Rhodes22-list] Motor size for the Rhodes 22

[Rik Sandberg]

Eric 

25 hp = overkill times about 4

Agree that you do need at least a 20 inch shaft, 25 is better.

Rik

Ayn Rand was a prophet - - it isn't my fault



Eric Nelson wrote:
> Ok so I upgraded the motor on my Rhodes. This of course has been frought
> with it's own troubles such as leaking seals, spun bushing on the prop that
> no one carries anymore, starter drive gear worn out. but this is all just
> extra work. What I am really curious about is how well the Rhodes will take
> havign a 25 horse motor pushing it through the water. I had a fair bit of
> trouble with the 9.5 short shaft out on the Sound, keeping the prop in the
> water and fighting the tidal currents really made getting anywhere when the
> wind just wouldn't cooperate. So am I looking damaging the hull by pushing
> the boat harder, should I add more support to the whole transom or will I
> just need it on the motor mount.
>
> -Eric
> 1978 Rhodes 22 Continental
> __________________________________________________
> To subscribe/unsubscribe or for help with using the mailing list go to http://www.rhodes22.org/list
> __________________________________________________
>
>