[Rhodes22-list] anchoring
Michael D. Weisner
mweisner at ebsmed.com
Thu Sep 18 11:49:01 EDT 2008
Bill,
I have a couple of questions:
1. How far and fast must one drift on the LIS so that "nobody could find
them." You were able to find them and rescue them. This
information
might be invaluable to the contraband dealers surely lurking on the
list.
2. Why can't a power boat "heave-to"? According to the CG course,
"A power vessel may heave-to by turning into the seas and applying
sufficient power to maintain position." Now, the real question,
"Who
tosses the line when ordered to heave-to for boarding?"
OK, now on to a more meaningful exercise.
I carry 200' of 3/8" nylon rode attached to about 6' of 1/4" chain for use
with my Danforth (#13, now called an S920) on the bow and a similar rode for
my Danforth (#15, now an S1300) on the stern rail. Much more line is very
difficult to store in a handy fashion (anchor locker & mesh bag on stern
rail.) This should give me very good holding power in nearly 30' of water
(7:1 scope) and fair weather anchoring in 40' of water (5:1 scope.) I have
had very few problems setting the Danforth with this rig since most of the
LIS bottom is sand and I typically anchor in 25 to 30 ft, taking into
account 8' tidal changes.
I have an additional 400' of 3/8" nylon with thimbles and shackles on both
ends in the laz for unknown situations and it could be quickly added to an
anchor rode for a deep water situation. I still would ONLY have 600' of
line, thus not be able to properly anchor in 100' of water, let alone 200'
(middle of the Sound!) While I would definitely not plan to overnight in
the NY shipping lanes, I suppose it is possible to run into an emergency in
deep water that might require setting an anchor.
How much line should we be carrying? How much do you have "at the ready?"
Mike
s/v Shanghai'd Summer ('81)
Nissequogue River, NY
Bill Effros wrote:
> Hank,
>
> I have rescued people on Long Island Sound "anchored" in 200 feet of
> water who deployed a 35 pound anchor with 100 feet of chain and were
> drifting so far so fast nobody could find them.
>
> They didn't have a clue that wouldn't work.
>
> You can't heave-to in a power boat.
>
> You know I advocate heaving-to, and teach people how to do it. But I
> still carry 400 feet of rode, and few others do.
>
> I am not arguing just to argue. I am trying to get people to actually
> dip their anchors into the water before their lives depend on being able
> to do it right.
>
> Ben anchors in huge atypically shallow waters. His experiences are not
> valid for most others, who can't spend a night carving football field
> sized circles in restricted anchoring zones. And it is important for
> others to know they can anchor just as safely with much less scope.
>
> Bill Effros
>
>
>
> Hank wrote:
>
>> Bill,
>>
>> You're getting a bit ridiculous. Who cares about the average depth of
>> the
>> sound. If you have problems and are in 100ft of water, then running
>> aground
>> is not an issue and you don't need to anchor. If you want to eat lunch
>> and
>> you are in 100 ft of water, then heave to. You only need enough rode for
>> the areas where you will anchor, not the whole GD sound! Quit arguing
>> just
>> to argue.
>>
>> Hank
>>
>>
>> On 9/18/08, Bill Effros <bill at effros.com> wrote:
>>
>>
>>> Ben,
>>>
>>> If you are right you will be able to convince me.
>>>
>>> You sail on Lake Pontchartrain? Average depth 12 feet?
>>>
>>> So you can carry 100 feet of anchor rode and have enough to anchor at
>>> 7:1 pretty much anywhere you go.
>>>
>>> I sail on Long Island Sound -- average depth 63 feet, so you think I
>>> should carry over 400 feet of anchor rode -- which I actually do carry.
>>>
>>> However, the Sound is more than 200 feet deep in many parts, and reaches
>>> more than 350 feet deep in some. You can't seriously suggest that
>>> people with big anchors should be carrying more than a ton of chain, or
>>> that I should carry more than a quarter mile of anchor rode.
>>>
>>> There must be some other answer.
>>>
>>> And the answer is that some types of anchors are just as effective with
>>> less scope. Excellent Danforth anchors like the Fortress are designed
>>> to be used at a 45 degree angle or less, down to 35 degrees or something
>>> like that. If maintained at that angle they won't pull out. The angle
>>> at which the rode enters the water will vary with the freeboard, the
>>> distance from the top of the water to the bottom, the height of the
>>> attachment point of the anchor to the bottom, and the distance you move
>>> your boat from dead over the anchor.
>>>
>>> If you have 100 feet of chain, and drop it and the anchor into 12 feet
>>> of water without moving your boat, you can put all your chain into the
>>> water at a 90 degree angle and be unable to set your anchor despite the
>>> fact that you have 7:1 scope.
>>>
>>> I am suggesting a rule of thumb for people learning to anchor, and that
>>> rule of thumb, for a Fortress Anchor, would be to set the anchor when a
>>> taut rode enters the water at a 45 degree angle or less. This will
>>> "tip" the anchor in such a way that the pull of the rode forces the
>>> tines into the bottom at an optimal angle that will hold securely, but
>>> that you will still be able to release by getting directly above the
>>> anchor.
>>>
>>> You cannot determine scope from the single angle of the rode entering
>>> the water. You are constructing Isosceles triangles because you insist
>>> on two 45 degree angles when I have recommended just one as the maximum
>>> angle for setting a specific type of anchor.
>>>
>>> Bill Effros
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> ben wrote:
>>>
>>>
>>>> I know I'm not going to convince you, but if you put out more than
>>>> 1.5:1
>>>> scope, you're making your angle lower than 45 degrees. If the rode is
>>>>
>>>>
>>> taut
>>>
>>>
>>>> and you have 6:1, the rode is going to pull up at about a 10 degree
>>>>
>>>>
>>> angle.
>>>
>>>
>>>> That's what you want for holding.
>>>>
>>>> True, it's probably overkill in lots of situations, but tides rise,
>>>> wind
>>>>
>>>>
>>> and
>>>
>>>
>>>> currents change, etc. Chain keeps that angle lower, so you get more
>>>>
>>>>
>>> holding
>>>
>>>
>>>> power from less rode.
>>>>
>>>> Ben
>>>>
>>>> -----Original Message-----
>>>> From: rhodes22-list-bounces at rhodes22.org
>>>> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Bill Effros
>>>> Sent: Wednesday, September 17, 2008 10:12 AM
>>>> To: The Rhodes 22 Email List
>>>> Subject: Re: [Rhodes22-list] anchoring
>>>>
>>>> Ben,
>>>>
>>>> Setting anchors has nothing to do with triangles -- I made reference to
>>>> a single angle.
>>>>
>>>> I am not suggesting short scope. I set with very long scope utilizing
>>>> a
>>>> 45 degree angle or less. Because the surface of the water is
>>>> essentially parallel to the bottom, you can look at the angle at the
>>>> surface to understand the approximate angle of pull on the bottom.
>>>>
>>>> Like you, I have discovered the problem with properly set Danforth
>>>> anchors is releasing them, even when you are almost directly above
>>>> them,
>>>> once they are properly set.
>>>>
>>>> Bill Effros
>>>>
>>>> PS -- The Standard Issue R-22 Anchor looks pretty, but is a lousy
>>>> anchor. The cladding defeats the purpose of the flukes. A Fortress
>>>> will exactly fit, but it rattles. I always anchor from the stern,
>>>> anyhow, so I just leave my pretty blue anchor in place hoping someone
>>>> will steal it someday. So far, no luck.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ben wrote:
>>>>
>>>>
>>>>
>>>>> Yeah, Bill is wrong on this one. Think about it. 45 degrees is
>>>>>
>>>>>
>>>>>
>>>> essentially
>>>>
>>>>
>>>>
>>>>> putting out 1.5 times as much rode as the depth you're anchoring in.
>>>>>
>>>>>
>>>>>
>>>> (Draw
>>>>
>>>>
>>>>
>>>>> it -- it's a right triangle with the anchor rode as the hypotenuse).
>>>>>
>>>>> I've never seen any article or source recommend less than 5:1 scope.
>>>>>
>>>>> But more importantly, I use the standard issue R22 danforth in mud all
>>>>>
>>>>>
>>> the
>>>
>>>
>>>>> time. I overnight in gunkholes or bayous regularly in the spring and
>>>>>
>>>>>
>>>>>
>>>> fall,
>>>>
>>>>
>>>>
>>>>> and in summer, I drop the hook mid-lake so I have the boat as a big
>>>>> swim
>>>>> platform. Everything you read is right. The more rode I put out, the
>>>>> better it holds. If I put out 10:1 or 12:1 -- which I sometimes do
>>>>> overnight if there's current or wind -- it's darn tough to pull out
>>>>> the
>>>>> anchor, even once I'm directly above it. Many times, I've had to use
>>>>>
>>>>>
>>> the
>>>
>>>
>>>>> winch to break it out of the mud.
>>>>>
>>>>> Maybe other anchors and bottoms are different, but I'll go with the
>>>>> literature on this one, because I know it's correct.
>>>>>
>>>>> Ben S.
>>>>> R22 Velvet Elvis
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: rhodes22-list-bounces at rhodes22.org
>>>>> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of John Lock
>>>>> Sent: Wednesday, September 17, 2008 9:02 AM
>>>>> To: The Rhodes 22 Email List
>>>>> Subject: Re: [Rhodes22-list] anchoring
>>>>>
>>>>> At 11:52 PM 9/16/2008 -0400, Bill Effros wrote:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> The point is that the anchor most of us use is designed to set by
>>>>>> being
>>>>>> pulled at a 45 degree angle from the bottom. If you pull it parallel
>>>>>>
>>>>>>
>>> to
>>>
>>>
>>>>>> the bottom it just stubs its flukes along and never sets properly.
>>>>>> And
>>>>>> if you have too much chain, you can never pull it at a 45 degree
>>>>>> angle,
>>>>>> so it will never set at all.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>> Let me jump in and say I have to disagree with Bill here. As I
>>>>> understand the physics of the Danforth-style anchors, they actually
>>>>> depend on a certain amount of horizontal (or parallell) movement to
>>>>> get the points of the flukes to dig in. Here's why...
>>>>>
>>>>> With the flukes hinged at the back of the anchor and free to rotate
>>>>> about that axis, their mass, pulled downward by gravity, will have a
>>>>> natural tendency to rest directly on the points. Consequently, an
>>>>> initial horizontal movement will naturally force the points downward
>>>>> and into the mud. Pulling up on the rode at a 45-degree angle will,
>>>>> in fact, help defeat the design by not allowing the mass of the
>>>>> flukes to perform their downward deflection.
>>>>>
>>>>> The main reason a few feet of chain helps an anchor set is that the
>>>>> extra weight helps keep the initial movement of the anchor more
>>>>> horizontal, because the rode will begin to rise before the chain
>>>>> does. This helps the flukes get their initial "traction". Once the
>>>>> points dig in and force continues to be applied the rode and chain
>>>>> can rise and increase to the 45 degree angle that is ideal to finish
>>>>> and maintain the set. It's those first few inches of movement that
>>>>> are critical to the set of the anchor.
>>>>>
>>>>> Cheers!
>>>>>
>>>>> John Lock
>>>>> ~~~~~~~~~~~~~~~~~~
>>>>> s/v Pandion - '79 Rhodes 22
>>>>> Lake Sinclair, GA
>>>>> ~~~~~~~~~~~~~~~~~~
>>>>>
>>>>> __________________________________________________
>>>>> To subscribe/unsubscribe or for help with using the mailing list go to
>>>>> http://www.rhodes22.org/list
>>>>> __________________________________________________
>>>>>
>>>>> __________________________________________________
>>>>> To subscribe/unsubscribe or for help with using the mailing list go to
>>>>>
>>>>>
>>>>>
>>>> http://www.rhodes22.org/list
>>>>
>>>>
>>>>
>>>>> __________________________________________________
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>> __________________________________________________
>>>> To subscribe/unsubscribe or for help with using the mailing list go to
>>>> http://www.rhodes22.org/list
>>>> __________________________________________________
>>>>
>>>> __________________________________________________
>>>> To subscribe/unsubscribe or for help with using the mailing list go to
>>>>
>>>>
>>> http://www.rhodes22.org/list
>>>
>>>
>>>> __________________________________________________
>>>>
>>>>
>>>>
>>>>
>>> __________________________________________________
>>> To subscribe/unsubscribe or for help with using the mailing list go to
>>> http://www.rhodes22.org/list
>>> __________________________________________________
>>>
>>>
>>>
>> __________________________________________________
>> To subscribe/unsubscribe or for help with using the mailing list go to
>> http://www.rhodes22.org/list
>> __________________________________________________
>>
>>
>>
> __________________________________________________
> To subscribe/unsubscribe or for help with using the mailing list go to
> http://www.rhodes22.org/list
> __________________________________________________
>
>
More information about the Rhodes22-list
mailing list