[Rhodes22-list] Hull Dimension for Letters

[Lowe, Rob]

Cowie,
I thinking 5 might be a better option just because I have a fender
hanging from the starboard stern rail right where 6 is centered that
would either obscure or mar the lettering.  But that's just me because
my slip has the dock on my starboard side.  But something to consider. -
rob
   

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of cowie
Sent: Friday, February 06, 2009 10:40 AM
To: rhodes22-list at rhodes22.org
Subject: Re: [Rhodes22-list] Hull Dimension for Letters


let me try and post both otpions 5 and 6



cowie wrote:
> 
> Thanks for the photo and dimensions, that's a big help.
> 
> Caesar:
> 
> I hope you don't mind I borrowed your boat photo to use as a
background to
> test my name layout.  You have a very good looking boat.  My boat is
due
> to arrive this April so I am currently living out my Rhodes experience
> vicariously through your photos and posts.
> 
> Enclosed are two options for the name placement, any votes for name_05
or
> name_06?
> 
> 
> 
> 
> cjlowe-2 wrote:
>> 
>>> I'll try the picture one more time.When I measured,I included the
curve
>> of the flare all the way to the aluminum rub-rail
>> 
>> Jerry Lowe
>> 
>> 
>> On my '86,straight down from the forward stanchion of the stern rail
(I
>>> don't
>>> have the captains seats )I measured 19" to the top of the boot
>>> stripe,which
>>> is 2" wide and then another inch of gelcoat before the bottom
>>> paint.Thirty
>>> inches forward,about 6" forward of the winch,you gain another inch
to
>>> 20"
>>> or
>>> 23" to the bottom paint. Hopefully ,there is a picture below.
>>>
>>> Jerry Lowe
>>>
>>> PS: This is Rik's work, also.
>>>
>>>
>>>  cowie <ccowie at cowieassociates.com> wrote:
>>>>
>>>> I am ready to have Rik fabricate my boat name but want to make sure
my
>>>> assumption for the hull size is correct.  Does anyone know the
height
>>>> from
>>>> the bottom of the rub rail to the top of the water line?  I am
assuming
>>> this
>>>> is about 21" in height for the area between the cabin bulkhead and
the
>>>> rear
>>>> rail stanchion.  Enclosed is the placement and size I am ready to
have
>>>> Rik
>>>> fabricate if my 21" assumption is correct.
>>>> http://www.nabble.com/file/p21856467/NAME_05.pdf NAME_05.pdf
>>>> http://www.nabble.com/file/p21856467/NAME_06.pdf NAME_06.pdf
>>>> --
>>>> View this message in context:
>>>>
http://www.nabble.com/Hull-Dimension-for-Letters-tp21856467p21856467.htm
l
>>>> Sent from the Rhodes 22 mailing list archive at Nabble.com.
>>>>
>>>> __________________________________________________
>>>> To subscribe/unsubscribe or for help with using the mailing list go
to
>>>> http://www.rhodes22.org/list
>>>> __________________________________________________
>>>>
>>>
>>> __________________________________________________
>>> To subscribe/unsubscribe or for help with using the mailing list go
to
>>> http://www.rhodes22.org/list
>>> __________________________________________________
>>>
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: boat name.jpg
>> Type: image/pjpeg
>> Size: 1853937 bytes
>> Desc: not available
>> Url :
>>
http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20090205/c4e
a876e/attachment.jpg 
>> __________________________________________________
>> To subscribe/unsubscribe or for help with using the mailing list go
to
>> http://www.rhodes22.org/list
>> __________________________________________________
>> 
>> 
>  http://www.nabble.com/file/p21874864/name_05.pdf name_05.pdf 
> 
http://www.nabble.com/file/p21874912/name_05.pdf name_05.pdf 
http://www.nabble.com/file/p21874912/name_06.pdf name_06.pdf 
-- 
View this message in context:
http://www.nabble.com/Re%3A-Hull-Dimension-for-Letters-tp21862226p218749
12.html
Sent from the Rhodes 22 mailing list archive at Nabble.com.

__________________________________________________
To subscribe/unsubscribe or for help with using the mailing list go to
http://www.rhodes22.org/list
__________________________________________________