[Rhodes22-list] Rigging discussion, extra forestay(s)

[John Lock]

Yes, that does make sense.  But I'm still curious.  My poor boat has  
been so highly modified already that I might as well continue the  
tradition.  A cutter -rigger Rhodes?  Intriguing...

Cheers!
John Lock
~~~~~~~~~~~~~~~~~~
s/v Pandion - '79 Rhodes 22
Lake Sinclair, GA
~~~~~~~~~~~~~~~~~~


On Jul 28, 2009, at 14:26, Arthur H. Czerwonky wrote:
> John,
>
> Cutter rig not recommended, as Hank has quickly pointed out.  It can  
> be done, but unnecessary.  There is hardly a better point to fix the  
> second stay arrangement than reinforced to the keel.  Make sense?
>
> Art
>
> -----Original Message-----
>> From: Hank <hnw555 at gmail.com>
>> Sent: Jul 28, 2009 2:19 PM
>> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
>> Subject: Re: [Rhodes22-list] Rigging discussion, extra forestay(s)
>>
>> John,
>>
>> How are you going to tack the genoa through only 6 inches of space  
>> between
>> the two forestays?
>>
>> Hank
>>
>> On Tue, Jul 28, 2009 at 2:14 PM, John Lock <jlock at relevantarts.com>  
>> wrote:
>>
>>> Art's addition of a furling spinnaker attached to the reinforced bow
>>> pulpit reminded me of a sail plan change I have been contemplating.
>>> So I thought I would run it by the list for comments.
>>>
>>> I saw an article recently about a guy (on a much larger boat) who  
>>> had
>>> added an inner forestay about six inches behind the main forestay.
>>> This ran to a mast "hound" (it was called) on the mast six inches
>>> below the masthead where the main forestay attached.  The result  
>>> was a
>>> hank-on jib stay running six inches inside the main forestay.  He  
>>> used
>>> this for a smaller, working jib and furled a big genoa on the main
>>> forestay.
>>>
>>> So I was thinking.... could this be applied to the much smaller  
>>> Rhodes
>>> as well?  Attachment to the mast is easy.  Attaching a strong  
>>> point to
>>> the deck just behind the furling drum is the tricky part.  I might  
>>> be
>>> tempted to add this to fly a 110% jib for upwind sailing and replace
>>> the big genoa on the main forestay with a furling UPS for offwind.
>>>
>>> But I don't know how to calculate the load on the inner forestay and
>>> engineer/install a deck attachment that would be strong enough.
>>>
>>> Cheers!
>>> John Lock
>>> ~~~~~~~~~~~~~~~~~~
>>> s/v Pandion - '79 Rhodes 22
>>> Lake Sinclair, GA
>>> ~~~~~~~~~~~~~~~~~~
>>>
>>>
>>> On Jul 28, 2009, at 13:20, Arthur H. Czerwonky wrote:
>>>> This rig addition is in place for a furling spinnaker but applies
>>>> also as a 'backup stay' for the forestay and furling genoa.  A 1/8'
>>>> SS wire is fixed to the masthead in front of the forestay and
>>>> brought to, and fixed to the front tip of the bow pulpit.  This bow
>>>> pulpit fixture (can be as simple as a SS sliding jaw, $4.99 at
>>>> Marineparts.com) has a 5/32" SS wire which is then fixed to the bow
>>>> eye assembly below.  Call this a cheap sprit-like option, if you
>>>> will, but provides a backup option.
>>>
>>> __________________________________________________
>>> To subscribe/unsubscribe or for help with using the mailing list  
>>> go to
>>> http://www.rhodes22.org/list
>>> __________________________________________________
>>>
>> __________________________________________________
>> To subscribe/unsubscribe or for help with using the mailing list go  
>> to http://www.rhodes22.org/list
>> __________________________________________________
>
> __________________________________________________
> To subscribe/unsubscribe or for help with using the mailing list go  
> to http://www.rhodes22.org/list
> __________________________________________________
>