[Rhodes22-list] Center board position
Lowe, Rob
rlowe at vt.edu
Wed Jun 3 09:23:03 EDT 2009
Hank,
You have a point. I think part of the differences is where the line
attaches to the board. From stuff I keep around for future reference,
notice the different attachment points in these two photos. - rob
Is this the diamond board? This looks like the one Ron posted which
suggested that perhaps it does not need to be lowered this far.
http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20090318/782
74994/attachment.jpg
as opposed to (might have to zoom in to see it). Is this the standard
center board?
http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20090318/1b5
0fa09/attachment.jpg
which is like my boat.
- Rob
-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Hank
Sent: Wednesday, June 03, 2009 8:57 AM
To: The Rhodes 22 Email List
Subject: Re: [Rhodes22-list] Center board position
Rob,
Wouldn't the pulley system require more rope, not less? If you can pull
it
up and down with only a foot of rope, it doesn't seem to me that it is
traveling very much no matter which system you are using.
Hank
On Wed, Jun 3, 2009 at 8:51 AM, Lowe, Rob <rlowe at vt.edu> wrote:
> John,
> As Mary Lou indicated, there may be some differences between the
diamond
> board and standard centerboard. I've got a 1976 model so I assume
I've
> got the standard centerboard. Mine's on a pulley system so it only
> takes maybe a foot or so of line to fully raise or lower the board.
> Here's a picture of my board in the fully lowered position. And as Ron
> is suggesting, perhaps the position that his was in coming from the
> factory is more efficient that fully lowered. I just fully raise and
> lower mine as needed and don't worry about it. - rob
>
>
>
http://www.rhodes22.org/pipermail/rhodes22-list/attch/200507/13/Getaway-
> 3.jpg
>
>
> -----Original Message-----
> From: rhodes22-list-bounces at rhodes22.org
> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Ron Singerman
> Sent: Tuesday, June 02, 2009 8:53 PM
> To: Rhodes list
> Subject: [Rhodes22-list] Center board position
>
> John,
>
> This is the position that Stan placed my CB when I picked it up at the
> factory.
>
> >>ron<<
> S/V Serenity
>
> The message is ready to be sent with the following file or link
> attachments:
> Edenton pick up 016.jpg
>
> Note: To protect against computer viruses, e-mail programs may prevent
> sending or receiving certain types of file attachments. Check your
> e-mail security settings to determine how attachments are handled.
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Edenton pick up 016.jpg
> Type: image/jpeg
> Size: 46694 bytes
> Desc: not available
> Url :
>
http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20090602/e55
> 78811/attachment.jpg
> __________________________________________________
> To subscribe/unsubscribe or for help with using the mailing list go to
> http://www.rhodes22.org/list
> __________________________________________________
>
> __________________________________________________
> To subscribe/unsubscribe or for help with using the mailing list go to
> http://www.rhodes22.org/list
> __________________________________________________
>
__________________________________________________
To subscribe/unsubscribe or for help with using the mailing list go to
http://www.rhodes22.org/list
__________________________________________________
More information about the Rhodes22-list
mailing list