[Rhodes22-list] [Fwd:Picture of IMF bearings

[Caesar Paul]

Rod,
 
The pictures did not come through. Please try again; seeing the pictures would help in my understanding of the set up.
 
Thanks,
Caesar

--- On Mon, 3/30/09, Ellner <ellner at pressenter.com> wrote:


From: Ellner <ellner at pressenter.com>
Subject: [Rhodes22-list] [Fwd:Picture of IMF bearings
To: "The Rhodes 22 Email List" <rhodes22-list at rhodes22.org>
Date: Monday, March 30, 2009, 7:28 PM


Ceasar

Here is a picture of my 1987 IMF when I had it apart. The two discs keep
the tube centered in the mast and there is a single disc at the top. The
lower discs are attached to the slide that slides in the slot in the
mast which holds its position in the high or low position on the mast.
The rectangle piece holds the tube in vertical position while the if
free to rotate in the center of the discs.  I don't recall any excessive
noise. The cables and wires in the mast might slap a little with normal
rocking when you're on the water. There are solutions for the slapping
noise.




Rod



-------------- next part --------------
An embedded message was scrubbed...
From: Rod Ellner <rodellner at mac.com>
Subject: no subject
Date: Mon, 30 Mar 2009 19:44:08 -0500
Size: 500466
Url: http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20090330/15102eb4/attachment.eml 
__________________________________________________
To subscribe/unsubscribe or for help with using the mailing list go to http://www.rhodes22.org/list
__________________________________________________