[Rhodes22-list] Sailing Upwind

[BenCittadino]

Rob,

Thanks for the advice. I see some guards as long as six feet. Too long?
Corrosion issue covering up the cable?

By the way I thought you were great in "West Wing".

BenC

Rob Lowe wrote:
> 
> Ben,
> The shroud "guards" that most of us use are 1" (maybe 1.5"?) PVC pipe.  It
> has to be large enough to pass the shroud and terminating hardware
> through.  Attached is a photo of Jerry's boat with shroud covers
> installed.  Mine are a bit longer than Jerry's, but you get the idea.  You
> can also get little "caps" that you notch that go on top of the guards. 
> You can also see them in the photo of Jerry's boat.  They do help prevent
> the sheets from hanging on the shrouds.  - rob
> 
> http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20090824/158a499e/attachment.jpg
> 
> 
> 
> -----Original Message-----
> From: rhodes22-list-bounces at rhodes22.org
> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of BenCittadino
> Sent: Tuesday, August 24, 2010 6:38 PM
> To: rhodes22-list at rhodes22.org
> Subject: Re: [Rhodes22-list] Sailing Upwind
> 
> 
> Alan;
> 
> I never considered your strategy of utilizing the furling mechanism during
> the tack, but it sounds positively elegant (if we can do it without
> falling
> all over ourselves). Can't wait to try it.  Do you recommend shroud
> "guards"
> or "boots" or "whatchamacallits", and if so what size?
> 
> BenC
> 
> 
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go
> to http://www.rhodes22.org/list
> __________________________________________________
> 
> 

-- 
View this message in context: http://old.nabble.com/Sailing-Upwind-tp29517214p29536071.html
Sent from the Rhodes 22 mailing list archive at Nabble.com.