[Rhodes22-list] silencing internal mast cable slap

[Caesar Paul]

Mike,
You can try putting in the rest of  the insulation from the other end of the 
mast.
I did it,
Caesar




________________________________
From: Mike Cheung <hmcheung57 at gmail.com>
To: rhodes22-list at rhodes22.org
Sent: Fri, July 16, 2010 3:57:25 PM
Subject: [Rhodes22-list] silencing internal mast cable slap


I read here that folks have used pipe insulation to silence the "cable slap"
from the cables running inside the mast.  I just put two 6' sections of
insulation onto the radio and masthead light cables, but that's all I was
able to push on.  I think that the insulation is hanging up on the bolt for
the spreaders.  I imagine that if I pull that bolt I'll be able to push more
insulation up the mast.  

My question is: Is it worth it to pull the spreader bolt or is what I've got
in there so far (about 12' of insulation) enough to end the cable slap?  

As you can tell, I'd prefer to not pull the spreader bolt if I don't need
to.

Thanks!


-----
Mike Cheung
s/v Muireann 1993/2008 Rhodes 22
-- 
View this message in context: 
http://old.nabble.com/silencing-internal-mast-cable-slap-tp29188111p29188111.html

Sent from the Rhodes 22 mailing list archive at Nabble.com.

__________________________________________________
To subscribe/unsubscribe go to 
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to 
http://www.rhodes22.org/list
__________________________________________________