[Rhodes22-list] VHF Antenna placement, and masthead light

[R22RumRunner at aol.com]

Alex,
A simple solution to your problem would be to remove the Windex and install 
 a short piece of plastic tubing, sliding it down above the piece that 
covers the  whips mount to the base. Reinstall the Windex and the cap that keeps 
it in  place. This way you won't have to remount anything.
 
Rummy
 
 
In a message dated 7/23/2010 5:51:13 P.M. Eastern Daylight Time,  
alex at brightrhino.com writes:


Hi,

I have purchased a Metz VHF antenna and a Windex  that fits on the stainless
whip of the antenna, as I look at the masthead,  the highest I can mount the
antenna/windex combo gives me perhaps 1/2" of  clearance for the windex,
which seems too little.

It looks like I am  going to have to fabricate a bracket to raise the 
antenna
higher, clearing  the raised forward portion of the masthead casting. How do
other list  members mount their VHF antenna?

Also, while I am working here, should  I install a masthead light? I have a
light on the forward part of the mast  about half way up, and a small round
stern light on the transom.  

Also, what is the ring on the upper forward part of the masthead  for?

Here are some pictures to clear up my poor  description.

Thanks,

Alex

http://old.nabble.com/file/p29249885/masthead%2Band%2Bvhf%2Bantenna.jpg  
http://old.nabble.com/file/p29249885/mast%2Bport%2Bside.jpg 

--  
View this message in context:  
http://old.nabble.com/VHF-Antenna-placement%2C-and-masthead-light-tp29249885p29249885.html
Sent  from the Rhodes 22 mailing list archive at  Nabble.com.

__________________________________________________
To  subscribe/unsubscribe go to  
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list  Charter and help with using the mailing list and archives go 
to  http://www.rhodes22.org/list
__________________________________________________