[Rhodes22-list] tiller

[R22RumRunner at aol.com]

You can purchase a new tiller from General Boats. It will have a thin coat  
of varnish and you will want to sand and give it several coats of varnish. 
I  have found six or seven coats will last many years.
 
Rummy
 
 
In a message dated 12/7/2011 11:34:00 A.M. Eastern Standard Time,  
rlowe at vt.edu writes:

Dennis,
Yes, I believe that was the finished bottom paint.   They had not added the 
boot stripe yet.  

Before you go to the  trouble to make a tiller, you might want to take a 
look at manufactured ones.  As usual, you can probably find them cheaper than 
at West Marine. I believe  someone on this list bought one, not sure exactly 
what model it is. -  rob

http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?productId
=99623&catalogId=10001&langId=-1&storeId=11151&storeNum=50045&subdeptNum=501
45&classNum=50146



-----Original  Message-----
From: rhodes22-list-bounces at rhodes22.org  
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Dennis  Frappier
Sent: Wednesday, December 07, 2011 7:37 AM
To: 'The Rhodes 22  Email List'
Subject: Re: [Rhodes22-list] Compass & Jack  Stands

Thanks for the picture Rob. The hull looks real good, is that  the finished 
bottom paint?  Do you have the line to the dagger board  replaced regularly?
There is a lot of value to me from the picture.   The Rudder stick looks 
longer than I have seen before.  I was going to  make a new one for mine.
What length and material do you recommend?  I  was thinking about a piece 
of a LAM (laminated beam) custom cut and fit to the  rudder?  

Sincerely,

Dennis Frappier
Marketing /  Business Development  Consultant

_________________________________________________

__________________________________________________
To  subscribe/unsubscribe go to  
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list  Charter and help with using the mailing list and archives go 
to  http://www.rhodes22.org/list
__________________________________________________