[Rhodes22-list] Chainplate reinstallation
Ronald Lipton
ronald.lipton at gmail.com
Thu Sep 1 22:13:42 EDT 2011
The bend is below the exposed section, below the wood section.
Ron
On Sep 1, 2011, at 8:47 PM, Cover-Man <cover-man at comcast.net> wrote:
> Ron,
>
> Is the 90 degree bend to the outside or inside?
>
> Art
>
> And, have a nice day!
>
> On Sep 1, 2011, at 10:38 AM, Ronald Lipton <ronald.lipton at gmail.com> wrote:
>
>> One word of caution. I rebedded my aft lower chainplate a couple of years ago.
>> I expected the chainplate to go straight down along the cabin wall so I drilled a hole
>> in the cabin liner - no chainplate. It turns out that the chainplate is bent by 90
>> degrees and bedded under the plywood spacer. I replaced the rotted wood and
>> epoxyed around the chainplate.
>>
>> Ron
>>
>> On 9/1/11 8:13 AM, Lowe, Rob wrote:
>>> I used a backing block is just a piece of 1X4, just something to hold the screws. I used machine screws with nuts. But again I used nylon since I wanted a break away function. Now that I look closely at what Slim did, he might have used sheet metal screws on both sides to provide the same ability. I don't think you want a strong though bolt that won't give should another serious problem occur. If you're discussing with Stan, might see what he recommended. Or maybe Slim will chime in. - rob
>>>
>>>
>>> __________________________________________________
>>> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>>>
>>> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
>>> __________________________________________________
>>
>> __________________________________________________
>> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>>
>> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
>> __________________________________________________
>
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________
More information about the Rhodes22-list
mailing list