[Rhodes22-list] FW: Chain plate repair

[Lowe, Rob]

Ed,
When my chain plate pulled I repaired in a very similar manner to what Slim had done on his boat.  I think this is an easier repair than cutting into the cabin top liner.  I don't think sturdiness is much of an issue here as there isn't much force on this stay.  - rob

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Ed Huffer
Sent: Monday, December 10, 2012 2:21 PM
To: rhodes22-list at rhodes22.org
Subject: Re: [Rhodes22-list] FW: Chain plate repair


Thanks!   I saw those and thought mine might be fairly easy to do without cutting the interior as I have all my windows out.  Is that more sturdy than the original design?   Thank you for taking the time to do that. 


-----Original Message-----
From: Lowe, Rob <rlowe at vt.edu>
To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
Sent: Mon, Dec 10, 2012 11:31 am
Subject: [Rhodes22-list] FW:  Chain plate repair


As Mary Lou suggested, you can search and find prior posts on this subject.  
Here is a note that I sent concerning Slim's repair. - rob

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org [mailto:rhodes22-list-bounces at rhodes22.org]
On Behalf Of Lowe, Rob
Sent: Wednesday, August 31, 2011 3:25 PM
To: The Rhodes 22 Email List
Subject: Re: [Rhodes22-list] Bad News

Not too bad.  Here are some photos of what Slim did when he had a pulled chain plate.

http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20080828/739e8461/attachment-0001.jpg

Above shows backing block epoxied to the outside skin after an access hole is cut in the cabin liner.

http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20080828/739e8461/attachment-0002.jpg

Shows attachment screws that are drilled through cabin side and inner backing block.  I used nylons screws for this instead of metal because I wanted the screws to break if this ever happened again.  Didn't want the whole cabin side being ripped out.  

http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20080828/739e8461/attachment.jpg

Shows cover plate over access hole.


The inner chain plates bend once they come through the cabin top and are screwed into the cabin top plywood under the cabin liner.  What Slim and I both did was mounted a straight chain plate to the boat and attach it through the side of the cabin.  I'm pretty sure Stan came up with this repair.  I'm using Slim's photo's since he did a neater job than I did. Slim?? - rob


__________________________________________________
To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list __________________________________________________

 
__________________________________________________
To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list __________________________________________________