[Rhodes22-list] wood finish

[Chris Geankoplis]

A caution on the Linoleum, a bit of water and it can be very slippery and at
the angle and direction of force when you step down (especially with the Pop
Top down) you may find your stern on the keel.
Chris G

-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Rob Granger
Sent: Saturday, January 21, 2012 5:40 PM
To: The Rhodes 22 Email List
Subject: Re: [Rhodes22-list] wood finish

I have a 73 Rhodes with a completely rotten interior (ALL OF IT).  I got it
for almost nothing and I'm in the process of fixing her up.

For the cabin sole....  I have some linoleum left over from when I
remodeled the kitchen in my house... so I'm going to glue that
Titebond(III) to a nice piece of treated 3/8" ply and cut to fit.   Not the
only way to do it, but that is how I'm gong to do it.... So I throw it on
the pile of ideas....  :-)

But right now, I'm still cleaning off the bottom and fixing dings and
scratches.

The other Rob

On Sat, Jan 21, 2012 at 6:40 PM, Goodness <spreadgoodnews at gmail.com> wrote:

> I have to replace my floor too. Newly purchased an 83' from a boat
> graveyard.  It appears to be interior grade 3/4 inch (rotten) plywood.  I
> am thinking of replacing with a teak and holly veneer 1/4" over Exterior
> grade (or pressure treated but must use bronze screws) 3/4 " ply.
>
>
>
> On Jan 21, 2012, at 2:30 PM, cowie <ccowie at cowieassociates.com> wrote:
>
> >
> > I am in the process of installing teak and holly 1/2" plywood cabin sole
> over
> > the 1/2" hardieboard that has begun to fail.  I plan to use a teak
sealer
> > and poly finish for the cabin sole project.  My boat is only a few years
> old
> > now and I am curious what type of wood Stan used for the other interior
> > areas such as the door to the head and and cabin bench.  What type of
> > finish/maintanance should  be used for these wood interior components?
>  Keep
> > natural and just clean occasionally, murphy's oil, teak oil?  I don't
> plan
> > to apply any type of poly finish to the other wood items but am curious
> what
> > others do with the wood if anything.
> > --
> > View this message in context:
> http://old.nabble.com/wood-finish-tp33180789p33180789.html
> > Sent from the Rhodes 22 mailing list archive at Nabble.com.
> >
> > __________________________________________________
> > To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >
> > For the list Charter and help with using the mailing list and archives
> go to http://www.rhodes22.org/list
> > __________________________________________________
>
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives go
> to http://www.rhodes22.org/list
> __________________________________________________
>



-- 
Dr. Robert Granger
Department of Chemistry
Sweet Briar College
434-381-6403
rgranger at sbc.edu
__________________________________________________
To subscribe/unsubscribe go to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to
http://www.rhodes22.org/list
__________________________________________________