[Rhodes22-list] Let there be light (LCD)

[Charles Nieman]

Joe
On my old 86 the lens just came off. After many years the rubber gasket sorta "glued" the lens to the fixture. A gentle prying with a pocket knife pulled it loose. 

Good luck 

Charles
98R22
s/v Daydream

> Date: Thu, 19 Jul 2012 19:39:47 -0700
> From: jjcampjr at yahoo.com
> To: rhodes22-list at rhodes22.org
> Subject: [Rhodes22-list] Let there be light (LCD)
> 
>      I want someone to tell me how to get the lenses off of the port and starboard running lights to replace the bulbs.  Then, there's the anchor lit up on the masthead. I am able to get the covers off, but the glass lenses beneath don't want to move. Before I break one of them, just tell me if I can lift, pry, wedge or otherwise free them from their seemingly welded positions.  My boat is a 1987 edition; running lights mounted on the bulkheads aft of the side ports. 
> 
>      On an unrelated matter, the advice dispensed on wiring the bilge pump was "boffo."  (at least in tests on my car battery)  I'll be on the boat Saturday, and I expect a trouble free experience there as well.  Como siempre, muchas gracias mis amigos de el balco Rhodes veinte y dos.  (Yo soy no el latino.) 
> 
> Joe Camp
> s/v John Dawson
> Bohemia River MD 
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________