[Rhodes22-list] IMF
Charles Nieman
blue66corvette at hotmail.com
Mon Mar 26 14:08:33 EDT 2012
I don't think there would be an issue. I had no choice. The top donut would not come off but the bottom ones were very loose. The only other point I can think of would be to repair or replace the donuts and or bearings at the bottom (which I had to do) or to replace the furling line (it is afterall just a piece of rope and won't last forever) but if all that is in good shape; then I agree to remove from the top.
Any thoughts from the rest of the list??????
> Date: Mon, 26 Mar 2012 09:26:48 -0700
> From: jbroadri at amfam.com
> To: rhodes22-list at rhodes22.org
> Subject: Re: [Rhodes22-list] IMF
>
>
> I got to the point of having the tube out of the mast, but then I got
> confused as to why you would remove all the stuff at the base rather than
> removing the donut at the top? My attachment is with the screws at the head
> and tack. I then decided rather than mess with the stuff at the bottom to
> just remove the donut at the top. I have to get the sail repaired (or
> hopefully not purchase a new one) before putting humpty dumpty back
> together. Am I in for any issues from removing the top donut rather than
> the whole attachment at the bottom?
>
> John B in WI.
>
> blue66corvette wrote:
> >
> >
> >
> >
> > Let me see if I can do this, everyone, please feel free to
> > amplify or edit. I don’t think I have ever seen a step by step and I am
> > going
> > by memory.
> >
> > After the mast is down;
> >
> > 1.
> > Remove the pop-top car from the mast
> >
> > 2.
> > Remove the boom attachment from the furling
> > assembly. This should involve a couple screws, plus pulling the furling
> > line
> > out of the boom and the out haul from the boom and main sail.
> >
> > 3.
> > Slide the furling tube and main out of the mast
> > (best to have two sets of hands as the tube gets pretty long and heavy if
> > you
> > try to hold from one end)
> >
> > 4.
> > Remove the bottom bearing and the bottom donut
> > from the furling tube.
> >
> > 5.
> > Remove the furling line from the furling tube
> > (this is usually attached by inserting through a hole in the tube and a
> > knot
> > tied on the inside of the tube).
> >
> > 6.
> > Remove the remaining bottom donut (the donut at
> > the top of the furling tube should not need to be removed).
> >
> > 7.
> > Unroll the main sail.
> >
> > 8.
> > Some main
> > sails are attached to the furling tube vie a groove in the furling tube
> > and
> > others have a sleeve in the luff of the sail and then attached with a
> > screw at
> > the head and tack. It should be pretty obvious which you have and how to
> > remove
> > the sail.
> >
> > 9.
> > To install new main sail, do these steps in reverse.
> > A special note; don’t forget to reinstall the pop top car (in the correct
> > orientation) prior to raising the mast. This is easy to forget, don’t ask
> > me
> > how I know. Charles98 Rhodes 22 /)~~~~~~~~~~~~~~~~
> >
> >
> > > From: R22RumRunner at aol.com
> >> Date: Wed, 12 Oct 2011 07:05:20 -0400
> >> To: rhodes22-list at rhodes22.org
> >> Subject: Re: [Rhodes22-list] IMF
> >>
> >> Mel,
> >> It's been a while since I've removed the sail from the mast. I will try
> >> to
> >> remember all the steps and post later today.
> >>
> >> Rummy
> >>
> >>
> >> In a message dated 10/10/2011 8:46:53 A.M. Eastern Daylight Time,
> >> melrothbard at yahoo.com writes:
> >>
> >> Rummy:
> >>
> >>
> >> It would be really advantageous if you could put out the information for
> >> removing the main sail from the IMF. I have been thinking about doing
> >> that
> >> task but was concerned with messing it up. Thanks
> >>
> >> Mel
> >> Paper Clipper "96"
> >>
> >> Melvyn H. Rothbard
> >> Attorney at Law
> >> Suite 3C
> >> 23 South 23rd Street
> >> Philadelphia, PA 19103
> >> 215 901 2258
> >> Fax: 215 656 0993
> >> melrothbard at yahoo.com
> >>
> >>
> >>
> >>
> >> CONFIDENTIALITY NOTICE
> >>
> >>
> >> The information and/or documents included in or accompanying this
> >> transmission contain(s) confidential information belonging to the sender
> >> which is
> >> legally privileged. The information is intended only for the use of the
> >> individual or entity to whom it was sent as indicated above. If you are
> >> not the
> >> intended recipient, you are hereby notified that any disclosure,
> >> copying,
> >> distribution or taking of any action in reliance on the contents of this
> >> transmission is strictly prohibited. If you have received this e mail in
> >> error, please delete this message and immediately notify us by replying
> >> to this
> >> e mail or telephoning us at 215 901 2258.
> >>
> >>
> >> ________________________________
> >> From: "R22RumRunner at aol.com" <R22RumRunner at aol.com>
> >> To: rhodes22-list at rhodes22.org
> >> Sent: Monday, October 10, 2011 8:24 AM
> >> Subject: Re: [Rhodes22-list] IMF
> >>
> >> David,
> >> The IMF is a General Boats design and build. Removing the sail is an
> >> easy
> >> operation once the mast is down.
> >> Perhaps there is a generous owner in your neighborhood that would be
> >> willing to help, otherwise we can give you a written set of directions.
> >>
> >> Rummy
> >>
> >>
> >> In a message dated 10/9/2011 9:01:12 P.M. Eastern Daylight Time,
> >> chsyhkr at gmail.com writes:
> >>
> >> Greetings,
> >>
> >> My 89 Rhodes was recycled in about 2007 or 08. The prior owner had IMF
> >> added as well as the furling jib.
> >>
> >> I have the manual on the furling jib but not the IMF. Any idea of the
> >> manufacturer so I can look it up?
> >>
> >> I do not think the sails have been removed in last 4 fours and I am
> >> debating
> >> removing them this winter, hence the need for the manuals.
> >>
> >> Thoughts on removing the sails for winter are appreciated although I
> >> hope
> >> I
> >> can get out as late as December and as early as March......
> >>
> >> David Craft
> >>
> >> Greensboro, NC
> >>
> >> Boat in Southport, NC
> >> __________________________________________________
> >> To subscribe/unsubscribe go to
> >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >>
> >> For the list Charter and help with using the mailing list and archives
> >> go
> >>
> >> to http://www.rhodes22.org/list
> >> __________________________________________________
> >>
> >> __________________________________________________
> >> To subscribe/unsubscribe go to
> >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >>
> >> For the list Charter and help with using the mailing list and archives
> >> go
> >> to http://www.rhodes22.org/list
> >> __________________________________________________
> >> __________________________________________________
> >> To subscribe/unsubscribe go to
> >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >>
> >> For the list Charter and help with using the mailing list and archives
> >> go
> >> to http://www.rhodes22.org/list
> >> __________________________________________________
> >> __________________________________________________
> >> To subscribe/unsubscribe go to
> >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >>
> >> For the list Charter and help with using the mailing list and archives go
> >> to http://www.rhodes22.org/list
> >> __________________________________________________
> >
> > __________________________________________________
> > To subscribe/unsubscribe go to
> > http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >
> > For the list Charter and help with using the mailing list and archives go
> > to http://www.rhodes22.org/list
> > __________________________________________________
> >
> >
>
> --
> View this message in context: http://old.nabble.com/IMF-tp32621684p33544751.html
> Sent from the Rhodes 22 mailing list archive at Nabble.com.
>
>
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________
More information about the Rhodes22-list
mailing list