[Rhodes22-list] One or Three

[Michael Hellyar]

ok. too many e-mails always "screw" up the screws and hinges and pivots. 
Already decided to replace the bolts with screws. Now on to standing rigging and new spreaders.


Mike Hellyar
sent from my iPad

On Jun 23, 2013, at 11:52 AM, Stan Spitzer <stan at rhodes22.com> wrote:

> No - read my e-mail again  -  it said the _*single three eights inch 
> bolt*_ through the bottom end of the mast allowed the mast step to be a 
> hinge for the mast to pivot and it you wanted the mast not to be in a 
> hinged mast step you could use two 3/8" bolts through the mast so it 
> would not pivot and I went on to explain why I thought that would not be 
> a good idea.
> 
> ss
> 
> 
> On 6/23/13 10:53 AM, Michael Hellyar wrote:
>> Stan
>> The single screw was your earlier email explanation. I thought it was yours. The fitting we acquired from WEST Marine for the 22 I am rehabbing has three holes. We did not check my partner's 22 until after you explained the single screw hinge and pivot system. He said his mast step is screwed down by one pretty hefty screw. His is 78 or 79.  Now we are thoroughly confused. I'm sure we will hear from the gang pretty quick.
>> 
>> Mike Hellyar
>> sent from my iPad
>> 
>> On Jun 23, 2013, at 9:11 AM, Stan Spitzer <stan at rhodes22.com> wrote:
>> 
>> 
> 
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________