[Rhodes22-list] Installing a hatch

Mon Aug 25 14:16:07 EDT 2014

We were your neighbors this weekend. I had my boat on Lake James.....at the
foot of Linville Gorge. Not too much wind but a great weekend. We made the
State Camp Ground our base and had the boat moored up in about 6" of water
and a few feet from the camp...ideal!

Richard - R22. Waif
On Aug 25, 2014 11:30 AM, "The Rhodes 22 Email List" <
rhodes22-list at rhodes22.org> wrote:

> Linville Land Harbor, just outside of Linville and Newland.  Just a few
> miles from Grandfather Mountain and just off the Blue Ridge Parkway.   We
> are right at 4 thousand feet, no comparison to the Rockies, but cool
> none-the-less.  Great place to avoid the heat and humidity of Florida, not
> to mention hurricanes or the heat of SC.  Our daughter and family were up
> from Abbeville this past weekend and loved the cool air.
>
> Cheers, Bob
>
> Sent from my iPad
>
> > On Aug 24, 2014, at 9:09 AM, The Rhodes 22 Email List <
> rhodes22-list at rhodes22.org> wrote:
> >
> > Bob,
> > Where in the NC mountains?
> >
> > Rummy
> >
> >
> > In a message dated 8/23/2014 10:00:23 P.M. Eastern Daylight Time,
> > rhodes22-list at rhodes22.org writes:
> >
> > Graham:  I am currently hiding from the Florida heat in the NC  mountains
> > and will not be back home until September 15th.  Stan may be  able to
> tell
> > you the size and maker as I know you are anxious to get your boat  back
> in the
> > water.
> >
> > Sorry I can not be more  helpful.
> >
> > Bob
> >
> > Sent from my iPhone
> >
> >>> On Aug 23, 2014, at  5:32 PM, The Rhodes 22 Email List
> >> <rhodes22-list at rhodes22.org>  wrote:
> >>
> >> Bob:
> >> Thanks for the info. Can you tell me the  make and size of the hatches?
> > Are
> >> they metal or plastic? Are they  installed directly on your cabin top or
> > on a
> >> built up collar of some  sort?
> >> Thanks,
> >>
> >> Graham
> >>
> >>
> >> -----Original Message-----
> >> From:  rhodes22-list-bounces at rhodes22.org
> >> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22
> > Email
> >> List
> >> Sent: August-22-14 6:26 PM
> >> To: The Rhodes  22 Email List
> >> Subject: Re: [Rhodes22-list] Installing a hatch
> >>
> >> Graham:  you don't say where you intend to place the  hatch.  GB
> installs
> >> adjacent the pop-top and parallel to the  mast.  I believe most new
> boats
> >> (and some re-cycled) have two  installed.
> >>
> >> Our 2010 had two installed as part of the  build.  Very nice.
> >>
> >> Bob on the "NoKaOi 3"
> >>
> >> Sent from my iPad
> >>
> >>>> On Aug 22, 2014, at 10:07  AM, The Rhodes 22 Email List
> >>> <rhodes22-list at rhodes22.org>  wrote:
> >>>
> >>> I used a couple of Bomars that I found on  eBay. I believe the factory
> >>> uses a plastic framed hatch when they  recycle. This might be a better
> >>> option as they are more flexible  than the aluminum frames.
> >>>
> >>> Richard
> >>>
> >>>
> >>> On Fri, Aug 22, 2014 at 12:27 AM, The Rhodes 22  Email List <
> >>> rhodes22-list at rhodes22.org> wrote:
> >>>
> >>>> Thanks Richard. What make and model did you  use?
> >>>>
> >>>> Graham
> >>>>
> >>>> -----Original Message-----
> >>>> From:  rhodes22-list-bounces at rhodes22.org
> >>>> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes
> >>>> 22 Email List
> >>>> Sent: August-21-14 9:18  PM
> >>>> To: The Rhodes 22 Email List
> >>>> Subject: Re:  [Rhodes22-list] Installing a hatch
> >>>>
> >>>> You need a  hatch around 18" square. Go ahead and just install
> >>>> it...the  deck curvature is not significant enough to cause a problem.
> >>>> Be fairly generous with the 5200 on the leading edge. Make sure you
> >>>> install the internal trim before screwing everything  down.
> >>>>
> >>>> Cheers
> >>>> Richard
> >>>> S/V Waif R22
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> On Thu, Aug 21, 2014 at  8:58 PM, The Rhodes 22 Email List <
> >>>> rhodes22-list at rhodes22.org> wrote:
> >>>>
> >>>>> Has  anyone installed a hatch on the Rhodes 22? I would like to add
> >>>>> one to my boat but the cabin top has a curve and I am  wondering how
> >>>>> others dealt with that. Was the hatch able  to take the curve or did
> >>>>> you need to build up a collar  for it.
> >>>>>
> >>>>> Alternatively, Can someone  tell me the setup for boats that had the
> >>>>> hatch installed  at the factory?
> >>>>> Thanks,
> >>>>>
> >>>>> Graham
> >>>>>
> >>>>> __________________________________________________
> >>>>> To  subscribe/unsubscribe go to
> >>>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >>>>>
> >>>>> For the list Charter and help with using the mailing list  and
> >>>>> archives go to http://www.rhodes22.org/list
> >>>>> __________________________________________________
> >>>> __________________________________________________
> >>>> To  subscribe/unsubscribe go to
> >>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >>>>
> >>>> For the list Charter and help with using the mailing list and
> >>>> archives go to http://www.rhodes22.org/list
> >>>> __________________________________________________
> >>>>
> >>>> __________________________________________________
> >>>> To  subscribe/unsubscribe go to
> >>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >>>>
> >>>> For the list Charter and help with using the mailing list and
> >>>> archives go to http://www.rhodes22.org/list
> >>>> __________________________________________________
> >>> __________________________________________________
> >>> To  subscribe/unsubscribe go to
> >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >>>
> >>> For the list Charter and help with using the mailing list and  archives
> >>> go to http://www.rhodes22.org/list
> >>> __________________________________________________
> >>
> >> __________________________________________________
> >> To  subscribe/unsubscribe go to
> >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >>
> >> For  the list Charter and help with using the mailing list and archives
> > go  to
> >> http://www.rhodes22.org/list
> >> __________________________________________________
> >>
> >> __________________________________________________
> >> To  subscribe/unsubscribe go to
> > http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >>
> >> For  the list Charter and help with using the mailing list and archives
> > go to  http://www.rhodes22.org/list
> >> __________________________________________________
> >
> > __________________________________________________
> > To  subscribe/unsubscribe go to
> > http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >
> > For the list  Charter and help with using the mailing list and archives
> go
> > to  http://www.rhodes22.org/list
> > __________________________________________________
> >
> > __________________________________________________
> > To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >
> > For the list Charter and help with using the mailing list and archives
> go to http://www.rhodes22.org/list
> > __________________________________________________
>
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives go
> to http://www.rhodes22.org/list
> __________________________________________________
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 213.jpeg
Type: image/jpeg
Size: 181704 bytes
Desc: not available
Url : http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20140825/6bf67241/attachment.jpeg 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 209.jpeg
Type: image/jpeg
Size: 171742 bytes
Desc: not available
Url : http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20140825/6bf67241/attachment-0001.jpeg 