[Rhodes22-list] Boat lift

[The Rhodes 22 Email List]

I don't think so. Seems you need something slotted so when the bunk
conforms to the hull the wood can slide. Couldn't you configure/weld
something to your lift that looks like what's on the Triad trailers? If you
need a pic of this let me know. Geoff

On Sun, Dec 14, 2014 at 8:18 AM, The Rhodes 22 Email List <
rhodes22-list at rhodes22.org> wrote:
>
> Do you guys think these would work?
>
>
> http://www.westmarine.com/buy/ce-smith--bolster-swivel-bracket--P017_513_002_518
>
> Cheers
> Ted
>
>
> > On Dec 13, 2014, at 3:34 PM, The Rhodes 22 Email List <
> rhodes22-list at rhodes22.org> wrote:
> >
> > All I did was have some "extensions" fabricated out of steel that
> > replaced the short ones that held the bunks to the lift designed for
> > power boats.  The extensions were made to be long enough to allow the
> > keel to clear the hoist frame, which as I recall was about 24" (but
> > that's from memory -- you should measure!)  I would suggest you make
> > them a little longer than needed, and put in some extra mounting holes
> > to make them adjustable.  Mine have been in place for three summers
> > (fresh water) and have worked fine.  The bunks flex to hold the boat
> > just like the trailer does.  Nothing else supports the boat.
> >
> > Bruce
> > s/v Tuxedo
> >
> >> On 12/13/2014 3:22 PM, The Rhodes 22 Email List wrote:
> >> Stan might be able to get them for you from his trailer manufacturer.
> >>
> >> Rummy
> >>
> >>
> >> Sent from Samsung Mobile
> >>
> >> -------- Original message --------
> >> From: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> >> Date:12/13/2014  2:40 PM  (GMT-05:00)
> >> To: Da List <rhodes22-list at rhodes22.org>
> >> Subject: [Rhodes22-list] Boat lift
> >>
> >> Hope everyone is well. I am in the process of fitting my boat to a
> newly acquired boat lift. Does anyone have any lessons learned concerning
> fitting the boat to a lift? I plan to replicate the trailer layout as
> closely as possible using 2x6 as flexible bunks. I am trying to find a
> source for some galvanized brackets but I am striking out.
> >>
> >> Cheers,
> >> Ted
> >>
> >> S/V AIRPOWER
> >> 1991/2013 R22
> >> Jacksonville, FL
> >>
> >>
> >>
> >> __________________________________________________
> >> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >>
> >> For the list Charter and help with using the mailing list and archives
> go to http://www.rhodes22.org/list
> >> __________________________________________________
> >> __________________________________________________
> >> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >>
> >> For the list Charter and help with using the mailing list and archives
> go to http://www.rhodes22.org/list
> >> __________________________________________________
> >
> > --
> > Bruce Mackey
> > Traverse City, MI
> >
> > __________________________________________________
> > To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> >
> > For the list Charter and help with using the mailing list and archives
> go to http://www.rhodes22.org/list
> > __________________________________________________
>
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives go
> to http://www.rhodes22.org/list
> __________________________________________________
>