[Rhodes22-list] Rigging repair

[The Rhodes 22 Email List]

You got it. You will have to dismantle the furling drum and top fitting as
the forestay wire with the fittings attached wont fit through the holes.
Make sure your forestay is the same length after you swage on the new
terminal. Tolerances are a little tight....

Cheers
On Oct 4, 2014 8:10 AM, "The Rhodes 22 Email List" <
rhodes22-list at rhodes22.org> wrote:

> Hey ya'll! Hope all is well across the fleet. I am headed south after my
> retirement from the Air Force yesterday. It appears as if my rigging failed
> during the trip last night. See picture:
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: image1.JPG
> Type: image/jpeg
> Size: 33890 bytes
> Desc: not available
> Url :
> http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20141004/42225c5f/attachment.JPG
> -------------- next part --------------
> In hindsight, I should have disconnected the genny, but in my haste to get
> out of town I left it connected. I am thinking I should be able to pull the
> cable out through the bottom near the GB furler and bring it to a rigger
> for a repair. Then I assume you just reinsert and reattach.
>
> Any tips?
>
> Cheers,
> Ted
>
> s/v AIRPOWER
> Jacksonville, Florida
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives go
> to http://www.rhodes22.org/list
> __________________________________________________
>