[Rhodes22-list] Galley base stringer

[The Rhodes 22 Email List]

Thank you Chuy.  I had found those drawings.  It was the widths along the curve of the hull that i needed.  Graham solved my problem as i could only come up with the forward width and a mid-way height.  Both of which were spot on with my 2 measurements, so i do believe my problem is solved.  Also my bulkead base measurements are quite different than those on the web.  I dont know if its from a different year or flooring solution.
Thank you guys!

Bob (palatka)

> On Apr 1, 2015, at 3:19 AM, The Rhodes 22 Email List <rhodes22-list at rhodes22.org> wrote:
> 
> A couple of galley floor drawings from the net:
> 
> Chuy( AfterMath)
> 
> 
> ---- The Rhodes 22 Email List <rhodes22-list at rhodes22.org> wrote: 
>> Graham:
>> You are a scholar and a gentleman!
>> Thank you!
>> 
>> Bob(palatka)
>> 
>>> On Mar 31, 2015, at 8:17 PM, The Rhodes 22 Email List <rhodes22-list at rhodes22.org> wrote:
>>> 
>>> Bob:
>>> 
>>> Funny that you should ask. I just cut out a new galley stringer yesterday. I
>>> have attached a photo of the old one with dimensions marked on it. In case
>>> you can't read them, the total length is 69 3/4" and the height of the
>>> stringer starting at the left (towards the bow)is 4 1/2" and then the height
>>> at each 1' mark going to the right (aft)is as follows: 
>>> 5 1/2, 5 3/4,5 3/4, 5 5/8, 5 3/4 and the height at the end is 4 3/4.
>>> In the photo you can see the black line where the floorboards rested on a
>>> support ledge.
>>> 
>>> If you want more detailed measurements, just ask. 
>>> 
>>> My boat is a 1976. I don't know if or when those dimensions changed over the
>>> years.
>>> 
>>> Hope this helps,
>>> 
>>> Graham 
>>> 
>>> 
>>> -----Original Message-----
>>> From: rhodes22-list-bounces at rhodes22.org
>>> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email
>>> List
>>> Sent: March-31-15 7:04 PM
>>> To: The Rhodes 22 Email List
>>> Subject: [Rhodes22-list] Galley base stringer
>>> 
>>> Does anyone have a measurement for the stringer under the galley ?
>>> I successfully replaced the port stringer, bulkhead base rib, head floor,
>>> and two center stringers.  So far so good. But there wasnt enough tensegrity
>>> left in the mush that used to be the galley stringer.
>>> I am sure i can trial and error it but i wouldnt mind a shortcut :-)
>>> 
>>> Bob (palatka)
>>> __________________________________________________
>>> To subscribe/unsubscribe go to
>>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>>> 
>>> For the list Charter and help with using the mailing list and archives go to
>>> http://www.rhodes22.org/list
>>> __________________________________________________
>>> -------------- next part --------------
>>> A non-text attachment was scrubbed...
>>> Name: Galley stringer.jpg
>>> Type: image/jpeg
>>> Size: 55885 bytes
>>> Desc: not available
>>> Url : http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150331/a05d359a/attachment.jpg 
>>> __________________________________________________
>>> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>>> 
>>> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
>>> __________________________________________________
>> 
>> __________________________________________________
>> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>> 
>> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
>> __________________________________________________
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Floor drawing1.jpg
> Type: image/pjpeg
> Size: 45052 bytes
> Desc: not available
> Url : http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150401/d18c8682/attachment.jpg 
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Floor drawing2.jpg
> Type: image/pjpeg
> Size: 34905 bytes
> Desc: not available
> Url : http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150401/d18c8682/attachment-0001.jpg 
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________