[Rhodes22-list] deck mounted chain plates

[The Rhodes 22 Email List]

Graham,

A drawing showing measurements for the aft lower tangs is attached. 

I used a carpenter's square to make the measurements. I butted the corner of
the square against the aft end of the tab and read the measurement at the
leading edge of the lower radius where the cabin top is raised about 1/2",
near the back of the pop-top. I then put the corner of the square against
the lower edge of the radius where the pop-top rim meets the cabin top and
measured radially out to the aft end of the tang, at its inside edge.

Hopefully you can make sense of the measurements. Let me know if you'd like
to have them referenced differently.

Dennis
Magic Moments
Leaving the imperial-metric conversions to the more able minded



-----Original Message-----
From: rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email
List
Sent: Sunday, January 11, 2015 3:13 PM
To: 'The Rhodes 22 Email List'
Subject: Re: [Rhodes22-list] deck mounted chain plates

<snipped>

If anyone with access to their boat at this time of year could give me the
precise measurements for the location of the upper chainplates, I would be
most grateful.

<snipped>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Measurements - aft lowers.JPG
Type: image/jpeg
Size: 50388 bytes
Desc: not available
Url : http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150112/59fcccff/attachment.JPG