[Rhodes22-list] Replace or fix outboard motor bracket?
Jay Curry
jac2 at wavecable.com
Wed May 31 12:53:23 EDT 2017
Attached is a picture of the hoist I use in place of the Winch that came
with our 2012 factory refurbished boat. The winch that came with the boat
has a 3000 lb capacity with a remote control as the only on off switch. I
had no complaint with the idea. The winch strap raises the motor to a top
limit and a bump stop allows it to tilt the motor automatically. But,
without an automatic kill switch at the top limit or a manual back-up shut
off switch for the remote, the winch had the power to rip the entire
assembly out of the stern if it did not get shut off just right, got sat on,
got dropped or got stuck in the on position for any number of reasons.
After several trial uses under sail it was clear there was a real risk of
damage to the boat from the winch. I removed the winch and replaced it with
the pulley system you see pictured.
My Tohatsu 6 hp 4 stroke is 58 lbs and pulls up easily with one hand. Every
other 4 stroke engine we looked at was in the 100 lb range. This pulley will
easily handle that extra weight. The other reason for the change was that
the top limit of the winch was about 2 to 3 inches lower than the Tohatsu
needed for comfortable forward tilt room.
If there had been a reliable safety stop for the winch and it lifted the
engine a bit higher, I may have kept using it. But, I have had the 4 double
pulley lift now for 5 years in salt water conditions with no trouble at all
and would not even consider going back to a winch.
Jay
Port Angeles, WA
--------------------------------------------------
From: "UWILLC via Rhodes22-list" <rhodes22-list at rhodes22.org>
Sent: Wednesday, May 31, 2017 3:19 AM
To: <rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Replace or fix outboard motor bracket?
> I had the manual rope-pulled bracket on my first Rhodes.
> I guess the question is what to do now with the broken motorized winch.
> Fix or go with a simpler design?
>
>
>
> --
> View this message in context:
> http://rhodes-22.1065344.n5.nabble.com/Replace-or-fix-outboard-motor-bracket-tp53234p53236.html
> Sent from the Rhodes 22 mailing list archive at Nabble.com.
> __________________________________________________
> To subscribe/unsubscribe go to
> http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives go
> to http://www.rhodes22.org/list
> __________________________________________________
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Engine Hoist 2 small.jpg
Type: image/jpeg
Size: 105420 bytes
Desc: not available
URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20170531/f376aef5/attachment.jpg>
More information about the Rhodes22-list
mailing list