[Rhodes22-list] Boat Height
Richard Stott
ric at stottarchitecture.com
Fri Feb 16 11:35:26 EST 2018
Learn something new every day!
I’m always nervous about height on the road since I scraped a bike off the car top once on a parking garage because I forgot it was there.
I have a continental rig, so it’s lighter and easier to move off the crutch - and I’m tall.
For short distances, to be honest, I have left mine on the crutch also, but just for the short distance to the launch ramp - no trees, no gas station canopies, no low wires. Its just safer and lower structural loads when it’s down low - I have a block at the mast post also.
Ric
sv Dadventure
Richard Stott
www.stottarchitecture.com
Office 631-283-1777
Cell 516-965-3164
> On Feb 16, 2018, at 11:20 AM, Richard Beytagh <rbeytagh at gmail.com> wrote:
>
> I've hauled boats for Stan to the Boat show for quite a few years now and
> many private deliveries and unless there is a reason not to do so, we
> always haul with the mast in the crutch. The standard bridge height is
> 14'-16' and with our height being around 12'-13' there is never a problem.
> If a semi can go under it so can we!
>
> As Peter points out, it is more convenient to leave the mast in the crutch
> when you're doing a single-handed mast drop or raise.
>
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
> Virus-free.
> www.avg.com
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
>
>
> ~~~ _/) ~~~
>
> Richard Beytagh
> Phone: 828 337 0180
>
> On Fri, Feb 16, 2018 at 10:22 AM, Peter Nyberg <peter at sunnybeeches.com>
> wrote:
>
>> When I picked up my recycled boat at the GBI plant in 2016, the mast was
>> on the crutch. I’d say that’s an indication that in Stan’s view it’s
>> perfectly OK to leave the mast on the crutch for trailering.
>>
>> As a side note, I actually find it pretty difficult to take the mast off
>> the crutch. It needs to be lifted higher than I can comfortably do. I can
>> do it by putting a step-ladder in the cockpit, but that’s a bit shaky. I
>> made a crutch like structure out of 2x4’s that I can attach to the front
>> end loader of my tractor to help me get the mast on or off the crutch when
>> I need to, but obviously I can only use that at home.
>>
>> Oh, and for my earlier posting about boat height on the trailer, that
>> estimate was with the mast down on the fore and aft pulpits.
>>
>> Peter Nyberg
>> Coventry, CT
>> s/v Silverheels (1988/2016)
>>
>>
>>> On Feb 16, 2018, at 9:03 AM, Richard Stott <ric at stottarchitecture.com>
>> wrote:
>>>
>>> Umm - should someone tell Alex that the boom crutch is not intended to
>> be used for trailering?
>>> It’s easy to drop the mast off the crutch and onto the stern rail and
>> tie it down - no?
>>> Ric
>>> sv Dadventure
>>>
>>> Richard Stott
>>> www.stottarchitecture.com
>>> Office 631-283-1777
>>> Cell 516-965-3164
>> __________________________________________________
>> To subscribe/unsubscribe go to http://www.rhodes22.org/
>> mailman/listinfo/rhodes22-list
>>
>> For the list Charter and help with using the mailing list and archives go
>> to http://www.rhodes22.org/list
>> __________________________________________________
>>
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
>
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________
More information about the Rhodes22-list
mailing list