[Rhodes22-list] Running wire from mast to electrical panel

[Graham Stewart]

Jeff: You can't really do that as the "space" between the deck and liner is
filled with core material. The best option that I can think of is to run the
wire down the mast support, under the floor and back up to wherever your
panel is. I put my panel on the main bulkhead so it is very close to the
deck thru hull.


Graham Stewart
Agile. R22, 1976
Kingston Ontario Canada



-----Original Message-----
From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of
Lowe, Rob
Sent: May 9, 2018 10:09 AM
To: The Rhodes 22 Email List
Subject: [Rhodes22-list] Running wire from mast to electrical panel

I'm replacing the wiring in my mast to a five wire cable so I can wire my
anchor and masthead light to operate independently (the two wire system
installed did not allow for that).   Does anyone know how to get the wire
from the plug on the cabin top to the electrical panel?  In other words, how
do you run or fish a wire between the cabin liner and the cabin top?  Thanks
for any help. - rob


__________________________________________________
To subscribe/unsubscribe go to
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list Charter and help with using the mailing list and archives go to
http://www.rhodes22.org/list
__________________________________________________