[Rhodes22-list] Covert Badlands 2500 Winch from remote to rocker switch?

[Bob Garrant]

Mike,
The attachment came through. Very helpful. And just in time because the
remote seems like it’s about to ‘expire’.
Thanks very much,
Bob


On Tue, Jun 18, 2019 at 4:13 PM Mike Riter <mike at traildesign.com> wrote:

> The switch needs to go through isolation relays to prevent back feeding the
> system. The relays should already be there. You'll need to remove the
> wireless control and wire a SPDT switch rated for at least 30 amps in its
> place. I put together a drawing showing how it should be wired.
>
> Michael Riter
> President, Trail Design Specialists, Inc.
> Lead Instructor, Trail Master and mechanized training
> mike at traildesign.com
> 678-410-8021
>
>
>
> On Tue, Jun 18, 2019 at 2:10 PM Peter Nyberg <peter at sunnybeeches.com>
> wrote:
>
> > The attachment came through for me.  The link is at the very bottom of
> the
> > message.
> >
> > Peter Nyberg
> > Coventry, CT
> > s/v Silverheels (1988/2016)
> >
> >
> >
> > > On Jun 18, 2019, at 2:47 PM, Mark West via Rhodes22-list <
> > rhodes22-list at rhodes22.org> wrote:
> > >
> > > sorry the attachment did not go?
> > >
> > >
> > > -----Original Message-----
> > > From: Mark West via Rhodes22-list <rhodes22-list at rhodes22.org>
> > > To: rhodes22-list <rhodes22-list at rhodes22.org>
> > > Sent: Tue, Jun 18, 2019 2:34 pm
> > > Subject: Re: [Rhodes22-list] Covert Badlands 2500 Winch from remote to
> > rocker switch?
> > >
> > > I would remove the remote system, then rewire manual switch 1 system
> > could back feed other and let the magic blue smoke out. mine needed 30
> amp
> > fuse I think this attachment is how I wire it  Mark s/v Fairwind 2
> > > -----Original Message-----
> > > From: Bgarrant <Bgarrant at gmail.com>
> > > To: rhodes22-list <rhodes22-list at rhodes22.org>
> > > Sent: Tue, Jun 18, 2019 10:20 am
> > > Subject: [Rhodes22-list] Covert Badlands 2500 Winch from remote to
> > rocker switch?
> > >
> > > I want to convert the Badlands 2500 Winch Motor for my motor lift from
> a
> > > wireless remote to a rocker switch. I would appreciate guidance for
> doing
> > > this. It seems pretty straightforward but maybe I’m overlooking
> > something.
> > > Thanks,
> > > Bob Garrant
> > > s/v Sail la Vie 2000
> > >
> > >
> > >
> > >
> > > --
> > > Sent from: http://rhodes-22.1065344.n5.nabble.com/
> > > -------------- next part --------------
> > > A non-text attachment was scrubbed...
> > > Name: Untitled.png
> > > Type: image/png
> > > Size: 26970 bytes
> > > Desc: not available
> > > URL: <
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20190618/b39bb15c/attachment.png
> > >
> > > -------------- next part --------------
> > > A non-text attachment was scrubbed...
> > > Name: switch.png
> > > Type: image/png
> > > Size: 26970 bytes
> > > Desc: not available
> > > URL: <
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20190618/984ca6e7/attachment.png
> > >
> >
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: SPDT reversible switch.jpg
> Type: image/jpeg
> Size: 599311 bytes
> Desc: not available
> URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20190618/f5cc30a3/attachment.jpg
> >
>