[Rhodes22-list] Covert Badlands 2500 Winch from remote to rocker switch?

[Mike Riter]

Ha! Yup. I'll correct the drawing. Thanks for catching that Hank.

Michael Riter
President, Trail Design Specialists, Inc.
Lead Instructor, Trail Master and mechanized training
mike at traildesign.com
678-410-8021



On Tue, Jun 18, 2019 at 5:07 PM Hank <hnw555 at gmail.com> wrote:

> Hey Mike,
>
> Hopefully not a dumb question, but it looks like you have the relay coils
> both going to the same contact on the motor.  Wouldn't they need to go to
> opposite contacts to reverse the direction of the motor?
>
> Hank
>
> On Tue, Jun 18, 2019 at 6:04 PM Mike Riter <mike at traildesign.com> wrote:
>
> > No worries Bob.
> > I was just looking at my drawing and realized you don’t need a 30 amp
> rated
> > switch since the switch is only powering the relay coils. I would
> recommend
> > the best water tight, marine grade switch you can get that’s rated for a
> > few amps higher than either of the relays.
> >
> > On Tue, Jun 18, 2019 at 4:07 PM Bob Garrant <bgarrant at gmail.com> wrote:
> >
> > > Mike,
> > > The attachment came through. Very helpful. And just in time because the
> > > remote seems like it’s about to ‘expire’.
> > > Thanks very much,
> > > Bob
> > >
> > >
> > > On Tue, Jun 18, 2019 at 4:13 PM Mike Riter <mike at traildesign.com>
> wrote:
> > >
> > > > The switch needs to go through isolation relays to prevent back
> feeding
> > > the
> > > > system. The relays should already be there. You'll need to remove the
> > > > wireless control and wire a SPDT switch rated for at least 30 amps in
> > its
> > > > place. I put together a drawing showing how it should be wired.
> > > >
> > > > Michael Riter
> > > > President, Trail Design Specialists, Inc.
> > > > Lead Instructor, Trail Master and mechanized training
> > > > mike at traildesign.com
> > > > 678-410-8021
> > > >
> > > >
> > > >
> > > > On Tue, Jun 18, 2019 at 2:10 PM Peter Nyberg <peter at sunnybeeches.com
> >
> > > > wrote:
> > > >
> > > > > The attachment came through for me.  The link is at the very bottom
> > of
> > > > the
> > > > > message.
> > > > >
> > > > > Peter Nyberg
> > > > > Coventry, CT
> > > > > s/v Silverheels (1988/2016)
> > > > >
> > > > >
> > > > >
> > > > > > On Jun 18, 2019, at 2:47 PM, Mark West via Rhodes22-list <
> > > > > rhodes22-list at rhodes22.org> wrote:
> > > > > >
> > > > > > sorry the attachment did not go?
> > > > > >
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: Mark West via Rhodes22-list <rhodes22-list at rhodes22.org>
> > > > > > To: rhodes22-list <rhodes22-list at rhodes22.org>
> > > > > > Sent: Tue, Jun 18, 2019 2:34 pm
> > > > > > Subject: Re: [Rhodes22-list] Covert Badlands 2500 Winch from
> remote
> > > to
> > > > > rocker switch?
> > > > > >
> > > > > > I would remove the remote system, then rewire manual switch 1
> > system
> > > > > could back feed other and let the magic blue smoke out. mine needed
> > 30
> > > > amp
> > > > > fuse I think this attachment is how I wire it  Mark s/v Fairwind 2
> > > > > > -----Original Message-----
> > > > > > From: Bgarrant <Bgarrant at gmail.com>
> > > > > > To: rhodes22-list <rhodes22-list at rhodes22.org>
> > > > > > Sent: Tue, Jun 18, 2019 10:20 am
> > > > > > Subject: [Rhodes22-list] Covert Badlands 2500 Winch from remote
> to
> > > > > rocker switch?
> > > > > >
> > > > > > I want to convert the Badlands 2500 Winch Motor for my motor lift
> > > from
> > > > a
> > > > > > wireless remote to a rocker switch. I would appreciate guidance
> for
> > > > doing
> > > > > > this. It seems pretty straightforward but maybe I’m overlooking
> > > > > something.
> > > > > > Thanks,
> > > > > > Bob Garrant
> > > > > > s/v Sail la Vie 2000
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Sent from: http://rhodes-22.1065344.n5.nabble.com/
> > > > > > -------------- next part --------------
> > > > > > A non-text attachment was scrubbed...
> > > > > > Name: Untitled.png
> > > > > > Type: image/png
> > > > > > Size: 26970 bytes
> > > > > > Desc: not available
> > > > > > URL: <
> > > > >
> > > >
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20190618/b39bb15c/attachment.png
> > > > > >
> > > > > > -------------- next part --------------
> > > > > > A non-text attachment was scrubbed...
> > > > > > Name: switch.png
> > > > > > Type: image/png
> > > > > > Size: 26970 bytes
> > > > > > Desc: not available
> > > > > > URL: <
> > > > >
> > > >
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20190618/984ca6e7/attachment.png
> > > > > >
> > > > >
> > > > >
> > > > -------------- next part --------------
> > > > A non-text attachment was scrubbed...
> > > > Name: SPDT reversible switch.jpg
> > > > Type: image/jpeg
> > > > Size: 599311 bytes
> > > > Desc: not available
> > > > URL: <
> > > >
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20190618/f5cc30a3/attachment.jpg
> > > > >
> > > >
> > >
> > --
> > Michael Riter
> > President, Trail Design Specialists, Inc.
> > Lead Instructor, Trail Master and mechanized training
> > mike at traildesign.com
> > 678-410-8021
> >
>