[Rhodes22-list] shipping R22 loaded on a trailer, on a flatbed

[Chris Geankoplis]

On Tue, 25 Jun 2019 at 16:41, Peter Nyberg <peter at sunnybeeches.com> wrote:

> Jesse,
>
>
>
> My trailer is a 2016 Triad dual axle.  All of the following measurements
> are, of course, approximate.
>
>
>
> The distance from the trailer's hitch to the stern of the boat is about
> 25’.
>
> My outboard extends about 2 1/2’ from the stern.
>
> If the rudder is pulled up, it sticks out a bit over 4’ from the stern,
> but I wouldn’t think you would need to travel with it up.
>
>
>
> From the hitch to just behind the trailer’s rear tires is 18’.
>
>
>
> As for height, without the mast crutch, the highest thing on the boat is
> the bow pulpit.  With the trailer jack as short as it can be made to go,
> the highest point of my bow pulpit is 8 1/2’ from the ground.  Total height
> would depend a bit on the orientation of the mast.
>
>
>
> If you need anything else, let me know.
>
>
>
> —Peter
>
>
>
>
>
> > On Jun 24, 2019, at 9:51 PM, Jesse Shumaker <
> jesse.laten.shumaker at gmail.com> wrote:
>
> >
>
> > Any measurements you could provide would be helpful.  Thanks for
> offering to
>
> > help!  It also would be good to know the max height of the boat on the
>
> > trailer as mentioned by Michael in another reply on this thread.  From
> what
>
> > I have seen on other threads, the height can vary depending on whether or
>
> > not the mast is on the crutch or not.
>
> >
>
> >
>
> >
>
> > --
>
> > Sent from: http://rhodes-22.1065344.n5.nabble.com/
>
>
>
>