[Rhodes22-list] Shroud extenders

[Michael Corley]

Just want to clarify for my edification.  When raising the mast, the
forward shrouds with extenders attached should be taught when mast is in
down position resting in the crutch?

Mike
S/V Ranger
Hampton Roads

On Thu, Apr 16, 2020 at 9:34 AM ROGER PIHLAJA <roger_pihlaja at msn.com> wrote:

> Jose,
>
> My shroud extenders are made from aluminum bar stock 13” L x 1” W x 1/4”
> T.  Both ends are rounded off with 1/2” R arcs.  In other words, both ends
> look like a half circle.  Both ends have 3/8” ID holes drilled thru them.
> The centers of these holes are located on the centerline and 1/2” from each
> end.  All of the sharp edges have been broken.  Hopefully, this answers
> your question.
>
> Roger Pihlaja
> S/V Dynamic Equilibrium
>
> Sent from my iPhone
>
> > On Apr 15, 2020, at 1:28 PM, jose <jose.faraldo at gmail.com> wrote:
> >
> > Hi all
> >
> > Can anyone let me know what’s the total length of the shroud extenders
> used
> > while raising the mast with the GB hoist system?
> >
> > Thanks - and keep safe!
> >
> > Jose
> >
> >
> >
> > --
> > Sent from: http://rhodes-22.1065344.n5.nabble.com/
>