[Rhodes22-list] Spring Lines

[Jay Friedland]

Jesse,
I assume my photos of that got stripped away, I tried attaching them as pdf’s. Any help from da list to format them correctly on that is appreciated.

My midship cleats are movable on a 1” T-track, same track as the jib cars move on. As any tension is shearing against the mounting screws for the track, I drilled and tapped 1-1/2”x1/4x20’s into the toerail. These were installed when the boat was new 23 years ago, and there has been extreme pressure fairly constantly from April through November storms, up to 4’ rolling waves with heavy tidal swings all through my time in less safe slips. So they are stress tested.
 

> On Apr 22, 2020, at 3:12 PM, Jesse Shumaker <jesse.laten.shumaker at gmail.com> wrote:
> 
> I assume the mid ship cleats may have been added by owners.  My boat does not
> have any midship cleats so I have used the metal grab rails as Sean
> mentioned.
> 
> Does anyone have photos to show where exactly the midship cleats are
> installed?   When I installed chocks on my foredeck, I found that it was
> hard to get to the underside of the toe rail, so I installed the chocks
> further from the toe rail where I could access the bolts coming through.
> 
> I assume a backing plate against the cabin roof would be needed when
> installing the midship cleats.  If anyone has examples of the mid ship cleat
> installation that would be good to share.  
> 
> 
> 
> --
> Sent from: http://rhodes-22.1065344.n5.nabble.com/